Is your kid Student Of The Month? Beat up Student Of The Month? Lets hear all about it!
"SOLID Bro!!"
Post
by "SOLID Bro!!" » February 21st, 2009, 4:26 pm
Exnav
Posts: 1420 Joined: November 4th, 2007, 8:42 pm
Location: St. Louis, Missouri
Post
by Exnav » February 21st, 2009, 4:48 pm
Oh no.....................................
Money ain't got no owners, only spenders - Omar Little
teemtrubble
Posts: 2269 Joined: October 11th, 2007, 2:15 pm
Location: simi valley, ca
Post
by teemtrubble » February 21st, 2009, 5:12 pm
Mike
teem trubble works CR500
(Gen 3 125+CR500 motor)
If I wanted a Yamaha I would have bought a piano!
lewisclan
PVT. 1st Class
Posts: 4804 Joined: June 1st, 2007, 3:34 pm
Location: Yucca Valley CA
Post
by lewisclan » February 21st, 2009, 5:16 pm
WTF are we talking about
"the game of life of is not so much in holding a good hand as playing a poor hand well"
teemtrubble
Posts: 2269 Joined: October 11th, 2007, 2:15 pm
Location: simi valley, ca
Post
by teemtrubble » February 21st, 2009, 5:19 pm
I dunno Bob called me earlier but, I didn't have any reception.
I tried calling Pecker head and sargent but, they didn't answer their phones...
Mike
teem trubble works CR500
(Gen 3 125+CR500 motor)
If I wanted a Yamaha I would have bought a piano!
"SOLID Bro!!"
Post
by "SOLID Bro!!" » February 21st, 2009, 5:53 pm
O.K. so here is a small quote from Bob: I set up for the water jump not wanting to be a pussy like Britincali I was soaring like an Eagle for a second or two landed in the water and the bike just stopped. Over the top and to the ground I went.
Right shoulder injury.
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » February 21st, 2009, 7:10 pm
teemtrubble wrote:
I beat RP, and didnt puss out on the Water Jump like everyone else.
I think I had a pretty good day.
My buddy Stoffers told me.....
Stoffers wrote: GO BIG, or GO THE FUCK HOME!!!!
Last edited by
AlisoBob on February 21st, 2009, 7:27 pm, edited 1 time in total.
"SOLID Bro!!"
Post
by "SOLID Bro!!" » February 21st, 2009, 7:12 pm
That's not even you you PUSSY!!!!
Nice try tho!!
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » February 21st, 2009, 7:29 pm
I'll have Teri take a real photo when she's done with Brit....
pstoffers
Posts: 1652 Joined: May 31st, 2007, 8:04 pm
Location: Oakdale, CA
Post
by pstoffers » February 21st, 2009, 7:40 pm
AlisoBob wrote: teemtrubble wrote:
I beat RP, and didnt puss out on the Water Jump like everyone else.
I think I had a pretty good day.
My buddy Stoffers told me.....
Stoffers wrote: GO BIG, or GO THE FUCK HOME!!!!
Some times you got to let her buck
Bob you're my new HERO
xtremeslide
Posts: 766 Joined: December 14th, 2008, 10:25 am
Location: Mediterranean coast
Post
by xtremeslide » February 21st, 2009, 8:00 pm
Pics of the water jump?
have you really lesions?
Take care dude...
CR500R
V-MAX 1200
teemtrubble
Posts: 2269 Joined: October 11th, 2007, 2:15 pm
Location: simi valley, ca
Post
by teemtrubble » February 22nd, 2009, 1:46 pm
This is what Bob told me he said
[quote=""SOLID", Bro!"]O.K. so here is a small quote from Bob: I set up for the water jump not wanting to be a pussy like the rest of you![/quote]
Bob said he'll have xrays in a few hours... and if he can feed himself he's good!
Mike
teem trubble works CR500
(Gen 3 125+CR500 motor)
If I wanted a Yamaha I would have bought a piano!
iggys-amsoil
Posts: 3602 Joined: June 1st, 2007, 6:09 pm
Location: Just North of March Airfield CA
Post
by iggys-amsoil » February 22nd, 2009, 2:23 pm
teemtrubble wrote: This is what Bob told me he said
[quote=""SOLID", Bro!"]O.K. so here is a small quote from Bob: I set up for the water jump not wanting to be a pussy like the rest of you!
Bob said he'll have xrays in a few hours... and if he can feed himself he's good![/quote]
Wouldn't that be an unfair advantage in the Biggest Loser. Jus' sayin.
To ride another lap, right on bro!
The pit is nothing more than a hole dugout to make the jump itself, About 30 wide, maybe 40-50 feet long then filed to above the axle with water.
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » February 22nd, 2009, 2:27 pm
teemtrubble
Posts: 2269 Joined: October 11th, 2007, 2:15 pm
Location: simi valley, ca
Post
by teemtrubble » February 22nd, 2009, 2:27 pm
I nominate Bob again for the Hoon of the day!
Mike
teem trubble works CR500
(Gen 3 125+CR500 motor)
If I wanted a Yamaha I would have bought a piano!
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » February 22nd, 2009, 2:39 pm
teemtrubble wrote: I nominate Bob again for the Dumbfuck of the day!
It was all pretty funny, until they told me its going to be a surgical fix...
teemtrubble
Posts: 2269 Joined: October 11th, 2007, 2:15 pm
Location: simi valley, ca
Post
by teemtrubble » February 22nd, 2009, 2:53 pm
Exactly my point you finished your race went to Jack's game and handled it, just like Evans Flat your the man Bob!
Mike
teem trubble works CR500
(Gen 3 125+CR500 motor)
If I wanted a Yamaha I would have bought a piano!
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » February 22nd, 2009, 3:06 pm
You gotta do, what you gotta do....
I guess I could have been life flighted out @ taxpayers expense, sued the Desert Vipers M/C Club for my choice to hit that jump, forfeited my Baseball game so my players could share the pain, and gone on pernanant job disabilty....
God, I love being a Democrat!!!
teemtrubble
Posts: 2269 Joined: October 11th, 2007, 2:15 pm
Location: simi valley, ca
Post
by teemtrubble » February 22nd, 2009, 3:26 pm
You left out a part "Telling us we would all be better because of it"
Mike
teem trubble works CR500
(Gen 3 125+CR500 motor)
If I wanted a Yamaha I would have bought a piano!
south central hoon
Post
by south central hoon » February 22nd, 2009, 4:26 pm
DAMNIT Bob! Its been months since we rode together, and i was looking forward to it. Heal Quick and let's ride!
Kudos on going for it though....
iggys-amsoil
Posts: 3602 Joined: June 1st, 2007, 6:09 pm
Location: Just North of March Airfield CA
Post
by iggys-amsoil » February 23rd, 2009, 1:54 am
and all its going to cost him is four screws a plate and a couple of Vicadins.
Doc ~ Well Mr.Bob, will that be Stainless or Titaium?
What ever dosen't trip at the airport.
nmdesertrider
Posts: 678 Joined: February 22nd, 2008, 8:18 pm
Post
by nmdesertrider » February 23rd, 2009, 6:08 am
no matter what you do it is always more impressive when you don't hurt yourself, unless you travel with one of those freak shows
03 CRF450/85 500
AlisoBob
"Hoon-father"
Posts: 15404 Joined: May 31st, 2007, 6:39 pm
Location: Aliso Viejo Ca
Post
by AlisoBob » February 23rd, 2009, 6:54 am
nmdesertrider wrote: no matter what you do it is always more impressive when you don't hurt yourself
No shit....
oggo69
Posts: 259 Joined: November 6th, 2008, 5:48 am
Location: Dublin , Ireland
Post
by oggo69 » February 23rd, 2009, 7:13 am
nasty break .... why dont u get the laser fusion done , i know two guys that crashed racing , went to the Uk and got it done and were racing 2 weeks later