1000 Hrs on a piston and rings

Uzi · Post by **Uzi** » July 16th, 2008, 4:06 pm

This guy on the other board is claiming hes put 1000 hrs on one set of piston and rings in 2 years time. That would be like 1.5 hrs a day 365 days a year for 2 years. Oh and he still has about the same compression.

Look here:
http://cr500riders.com/cgi/yabb/YaBB.pl ... 986680/0#9

Post by **AlisoBob** » July 16th, 2008, 4:27 pm

Mr. Know-It-All wrote:looks like your running way too lean, better be careful you dont burn a hole in the top of your piston, run a lower octane too, todays gas runs hotter than the gas that the bike was designed for, because there was more lead in it back then, or just richen your fuel up just a touch over what its supposed to be ,i have almost 1000 hours on a set of rings and piston i installed two years ago and still have nearly the same compression, you only gain a 1/2 horsepower when you run that lean

britincali · Post by **britincali** » July 16th, 2008, 4:46 pm

This tells ya a lot.....

deathmachine

New Hoon
Offline

88.7 hp,no stroke or
bore mod

Wheelie-Gene · Post by **Wheelie-Gene** » July 16th, 2008, 6:24 pm

88.7 hp.... 1/2 hp gain when lean....

He didn't say how much of that 1000hrs was dyno flogging time.

teemtrubble · Post by **teemtrubble** » July 16th, 2008, 6:34 pm

Some one needs to pull the piston out of his ass!

Uzi · Post by **Uzi** » July 16th, 2008, 6:55 pm

Wheelie-Gene wrote:88.7 hp.... 1/2 hp gain when lean....

He didn't say how much of that 1000hrs was flogging himself looking at AF pics on the internet

Fixed.

Its all good though that 88.7 Hp 96' is going to be his "show" bike.

deathmachine wrote: Well if thats the only problem as far as ''fit'' im good with that, as far as an AF i want to keep this bike original ,im saving to buy an AF from service honda, but this will be my show bike, it will be ridden from time to time but the AF will be my wheels

lewisclan · Post by **lewisclan** » July 17th, 2008, 7:16 am

This is a tuff crowd.......I like it

britincali · Post by **britincali** » July 17th, 2008, 9:45 am

LOL now hes an "ex member"

dannygraves · Post by **dannygraves** » July 17th, 2008, 10:10 am

I saw a retarded post from him a couple days ago, he posted in robs starting thread that it was "just like starting a 450"

fucken retard!

Wheelie-Gene · Post by **Wheelie-Gene** » July 17th, 2008, 8:20 pm

Shouldn't the old turd (not that 500s are turds) be the thrasher and the SH bike be the trophy????

Won't see stupid shit like that over here.
Glad to see that y'all set him straight.

Post by **AlisoBob** » July 17th, 2008, 9:01 pm

Gene, dont know if you caught it, but theres a few new members over at Tracy's.... none have motors..... and none have got the "boot" like you did.

More of the same consistancy.....

nmdesertrider · Post by **nmdesertrider** » July 18th, 2008, 7:27 am

it's the reverse bridge relief!

Travis · Post by **Travis** » July 18th, 2008, 5:15 pm

I had noticed the newbs with no bikes and thought about calling them out on it for a few laughs but then I thought why should I give a shit. That is pretty harsh to hold some to a rule and not others though.

Wheelie-Gene · Post by **Wheelie-Gene** » July 18th, 2008, 9:40 pm

Yeah....I know.
I don't care either.... I got shot in the ass over there for pointing out that kind of truth, look who's laughing now.
I said it before.... Shit like that is proof of where the pro's are.

Maybe he was in fact one of them jet-skiers that they try to keep out.

BannedCR500Riders.com

1000 Hrs on a piston and rings

1000 Hrs on a piston and rings