CDI wire locations

All Engine, Clutch, Chains, and Sprockets Stuff Here.
Post Reply
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

CDI wire locations

Post by Roostius_Maximus »

I need to know what location the wires are in on the 2000-2001 CR250 ignition at the CDI plug

with the clip to release it at the bottom / towards the steering stem i think, what colors are these numbers?

Image
User avatar
mxdogger
Posts: 133
Joined: January 5th, 2010, 9:37 pm
Last active:

Post by mxdogger »

Adam heres the color code, this is looking at the connector from the backside like your picture shows.

1.blue
2.black w/white stripe
3.black w/yellow stripe
4.blue w/yellow stripe
5.white
6. black
7.green
8. green w/white stripe :cool: :cool: :cool:
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

EXCELLENT!
thanks!
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

ok, i've changed the harness arround a bit. the 2002 is a snakes den

Image

Image

Image

Image
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

the blue and white are the generator, i cant see it making any difference which way they go, but they dont match, must have been opposite locations in other years
User avatar
AlisoBob
"Hoon-father"
Posts: 15405
Joined: May 31st, 2007, 6:39 pm
Last active:
Location: Aliso Viejo Ca

Post by AlisoBob »

Image
fastkart
Posts: 645
Joined: November 20th, 2007, 10:06 am
Last active:

Post by fastkart »

Roostius_Maximus wrote:the blue and white are the generator, i cant see it making any difference which way they go, but they dont match, must have been opposite locations in other years
When I wired my MSD unit to a '97 250 stator I assumed the wires for the generator didn't matter as well. After chasing my tail because it wouldn't start, I swapped them around and it lit up.
User avatar
Roostius_Maximus
Site Admin
Posts: 4641
Joined: November 16th, 2007, 3:24 pm
Last active:
Location: Mt Nebo, Manitoba, Canada
Contact:

Post by Roostius_Maximus »

Ok, I just swapped the wires so they matched how the images were incase of polarity or whatever you'd call it in a stator
Post Reply