The Process begins

gregrobo · Post by **gregrobo** » July 29th, 2009, 6:09 am

why not make a 4mm washer behind the standard engine bush

2strokes4ever · Post by **2strokes4ever** » July 29th, 2009, 6:12 am

what do you make your's from gregrobo

gregrobo · Post by **gregrobo** » July 29th, 2009, 6:24 am

i rused the original engine bush they knock out.
i didnt like the idea of trying to line a washer up with the swing arm bolt so i made a 4mm spacer out of plain ali and knocked the engine bush back in so the left bush is further out than the right that was for a 05 crf 250r
but a done a frame for a mate the other day its a 02 cr 250r and its the same offset if you want pics pm me and ill hook you up

dannygraves · Post by **dannygraves** » July 29th, 2009, 7:28 am

you know on an '05 crf you can just buy a 59mm cr125 swingarm bushing, then switch side with the other, and its totally eom

no need to make spacers on a gen-3 or 4

hoofarted · Post by **hoofarted** » July 29th, 2009, 8:05 am

2strokes4ever wrote:
CR500R7 wrote:Stainless is always a good choice.
if i can get titanium, then i'll go with marine grade stainless

We made ours from stainless and they worked out well. 125 bushings wont work on Gen2, BTW.

Post by **AlisoBob** » July 29th, 2009, 8:11 am

dannygraves wrote:you know on an '05 crf you can just buy a 59mm cr125 swingarm bushing, then switch side with the other, and its totally eom no need to make spacers on a gen-3 or 4

Yup.... The bushing is like $8

2strokes4ever · Post by **2strokes4ever** » July 29th, 2009, 3:37 pm

dannygraves wrote:you know on an '05 crf you can just buy a 59mm cr125 swingarm bushing, then switch side with the other, and its totally eom no need to make spacers on a gen-3 or 4

i'll keep that in mind for future builds.

gregrobo · Post by **gregrobo** » July 29th, 2009, 4:24 pm

yeah but waiting for parts is a pain in the arse

2strokes4ever · Post by **2strokes4ever** » August 2nd, 2009, 5:32 pm

Looks like my build is going to halt for a bit, as i have to go to the desert and render a shit load of houses

The RM250 is coming with me

bearorso · Post by **bearorso** » August 3rd, 2009, 2:01 am

2t4ever,

I've a New, grey plastic stator cover, with seal ring , if you want it - no charge. I'm in OZ.

Bear

2strokes4ever · Post by **2strokes4ever** » August 3rd, 2009, 5:42 pm

Check this out

My new F@#$%^# rims, F$#@ me...

Apparently he found the Aussie Bogans in their natural habitat :bsmeter:

Disturbed · Post by **Disturbed** » August 3rd, 2009, 6:51 pm

Far be it from me to question someones views on safety, but holy feking crap, I wouldn't have my hands anywhere near that saw other then to be running it myself.

dannygraves · Post by **dannygraves** » August 3rd, 2009, 7:25 pm

WTF!

CR500R7 · Post by **CR500R7** » August 3rd, 2009, 8:55 pm

Thats different.

AUSSIECR500AF · Post by **AUSSIECR500AF** » August 5th, 2009, 3:35 am

nah, that is the true blue aussie way......................................

eyesky2002 · Post by **eyesky2002** » August 5th, 2009, 4:04 am

WTF was that about??? Gotta say there was a couple nice hot asses at the end of that vid tho

2strokes4ever · Post by **2strokes4ever** » August 5th, 2009, 10:56 pm

AUSSIECR500AF wrote:nah, that is the true blue aussie way......................................

yeah mate that is the aussie way

dannygraves · Post by **dannygraves** » August 6th, 2009, 7:40 am

eyesky2002 wrote:WTF was that about??? Gotta say there was a couple nice hot asses at the end of that vid tho

For some reason every aussie chick I've met was smokin' hot. I used to work w/ one and she was so fucken hot you couldn't look right at her without a welding mask.
When I was 15 I was surfing beach 204 in SC and this absolutely beautiful aussie girl was visiting family and she came out to surf. she was 16. Well, her board shorts were a little big and while she was paddling I caught a quick cooter shot

I spent the rest of the day trying to get better aquainted with her, but she wouldn't have it

some bf back home

Post by **AlisoBob** » August 6th, 2009, 8:11 am

http://www.news.com.au/story/0,27574,25 ... 98,00.html

hoofarted · Post by **hoofarted** » August 6th, 2009, 8:42 am

40 per cent of Australian women wear a bra with a cup size DD or bigger

* Breasts of Aussie women getting larger
* 40 per cent of women DD or bigger
* Obesity, contraceptive pill to blame

HOLY SHIT!! Sounds like my kinda town - minus the obesity part!

http://www.youtube.com/user/500bigbore · Post by **Roostius_Maximus** » August 6th, 2009, 9:38 am

dannygraves wrote:... I caught a quick cooter shot ...

Dude, thats so funny, at coffe break this chick i havent seen in years brought some shit for her bro to get worked on, shes still smokin hot.
I used to hang out with her back 10yrs ago, never been surfing, but i'd pick her up on the way to the pits and she'd never worn underwear, but loved her short shorts. VERY religious and i wasnt in for that, but we "hung out" for almost a year. She was very defiant of her church and got kicked out for a bit cuz she wore pants to it, and then when she did wear a dress, it was too short, and they seen that she shaved her legs, maybee they seen what else she shaved too

Post by **AlisoBob** » August 6th, 2009, 9:46 am

dannygraves · Post by **dannygraves** » August 6th, 2009, 10:29 am

thats it, I'm moving to australia! DD tits everywhere, plenty of hoons to ride with, Holden cars, and they build some wicked cars down there! Beautiful surfing! holy crap, why didn't I think of this sooner! Wonder what the job market is like

Post by **AlisoBob** » August 6th, 2009, 11:34 am

dannygraves · Post by **dannygraves** » August 6th, 2009, 11:59 am

and shit, look at the mag cover, they watch family guy too!

BannedCR500Riders.com

The Process begins