Parts I need

Come on in, No registration needed.... Thinkin' about stepping up to the ultimate dirtbike? Ask any questions you need answered.

ALSO: Post anything your looking for, or that is taking up space and you want to get ride of.. ALL TRANSACTIONS ARE BETWEEN THE BUYER / SELLER!
Post Reply
User avatar
dannygraves
Posts: 8020
Joined: June 1st, 2007, 2:03 pm
Last active:
Location: Las Vegas, NV

Parts I need

Post by dannygraves »

Alright guys, I need some parts and ebay is pissing me off, so I'm hoping some of you guys will have them. Not looking for hand outs, will pay, just need good parts.


'90+ right side cover (one of the water outlets broke off :-( )
'88+ left (stator side) case half
'89+ head
'94+ stator covers (grey) x2

(DONE- Mike, u da man!) '87+ CDI +waterpump parts :wink:
(DONE-ebay)'85-'01 waterpump cover and the metal peice under it.
(DONE-ebay)'89+ reed cage
(DONE-ebay).75mm over wisecos x2 (both jugs are at the same bore)
(DONE-al0ha, thanks again mang!)'89+ jug water inlet elbow
Last edited by dannygraves on June 20th, 2008, 11:11 am, edited 3 times in total.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Image
Top
kkvslayer
Posts: 447
Joined: June 11th, 2007, 11:56 am
Last active:
Location: Gjoa Haven,Nunavut

Post by kkvslayer »

Danny My stock reed cage is just sittin in a box on a shelf its yours if ya want it pm me your address,I think its got boyesen reeds.
Image
1994 Heartless CR500R
1986 KX500
Top
User avatar
dannygraves
Posts: 8020
Joined: June 1st, 2007, 2:03 pm
Last active:
Location: Las Vegas, NV

Post by dannygraves »

thanks man, but I need '89+ reeds, the older ones are longer and won't fit in the '89+ cylinders... :cry:
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Image
Top
kkvslayer
Posts: 447
Joined: June 11th, 2007, 11:56 am
Last active:
Location: Gjoa Haven,Nunavut

Post by kkvslayer »

dannygraves wrote:thanks man, but I need '89+ reeds, the older ones are longer and won't fit in the '89+ cylinders... :cry:
Too bad,I thought they were all the same,did they do that as part of the detuning process?you building a engine for your Gen 4?
Image
1994 Heartless CR500R
1986 KX500
Top
User avatar
dannygraves
Posts: 8020
Joined: June 1st, 2007, 2:03 pm
Last active:
Location: Las Vegas, NV

Post by dannygraves »

come on guys! someone has to have SOME of these parts!
I've got the pistons, everything else I still need.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Image
Top
User avatar
ISBB
Posts: 1547
Joined: October 25th, 2007, 7:16 pm
Last active:
Location: Sin City
Contact:
Contact ISBB

Post by ISBB »

I have all of them but that takes parting out to a whole new level :P
97 Steel 500 that wants to be an AFC
Top
HrcRacing
Posts: 716
Joined: October 5th, 2007, 11:22 pm
Last active:

Post by HrcRacing »

I have a brand new '01 OEM CDI in the box. Not sure if you want to go new but I have one. Make me a fair offer and it's yours.
Top
User avatar
dannygraves
Posts: 8020
Joined: June 1st, 2007, 2:03 pm
Last active:
Location: Las Vegas, NV

Post by dannygraves »

CR500R-G3 wrote:I have a brand new '01 OEM CDI in the box. Not sure if you want to go new but I have one. Make me a fair offer and it's yours.
hhhmmm, let me think about that one... I'm a cheep bastard, so I was hoping for someones spare or something, but if I exhaust everything else, I know for sure your would work...
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Image
Top
User avatar
aloha450x
Posts: 874
Joined: December 8th, 2007, 12:38 am
Last active:

Post by aloha450x »

i have a 91 water elbow. the one with the oring that bolts to the cylinder?is that the one?
Top
User avatar
dannygraves
Posts: 8020
Joined: June 1st, 2007, 2:03 pm
Last active:
Location: Las Vegas, NV

Post by dannygraves »

yup, thats what I need. What do you want for it?
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Image
Top
User avatar
aloha450x
Posts: 874
Joined: December 8th, 2007, 12:38 am
Last active:

Post by aloha450x »

nada i dont need it. it's just collecting dust in the tool box. pm your address and ill send it your way.
Top
User avatar
dannygraves
Posts: 8020
Joined: June 1st, 2007, 2:03 pm
Last active:
Location: Las Vegas, NV

Post by dannygraves »

PM sent, thanks man!
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Image
Top
Post Reply

Return to “Shoppers Only!”