Wide Ratio Tranny Gears
Wide Ratio Tranny Gears
Hey Hoons!!.....I got the 92 CR500 motor because at $600 for motor, carb, electronics it was a steal. However I am aware that I also ended up with the close ratio tranny......Gonna look into getting the 4th and 5th gear out of the 93-01 CR500. Can anyone tell me what the part numbers are for those gears? Or at least how many teeth each one has?.....Everywere I look refers to them by number of teeth and not as 4th or 5th gears.
- freeride588
- Posts: 418
- Joined: November 20th, 2010, 3:51 pm
- Location: San Diego
I would just run a 15 tooth front sprocket.
$13.
Find any post by Roostius Maximus,
Click the red in his signiture, and there is a ton of CR500 parts info and pictures
$13.
Find any post by Roostius Maximus,
Click the red in his signiture, and there is a ton of CR500 parts info and pictures
Yah, I'm from Saskatchetoon!
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
- freeride588
- Posts: 418
- Joined: November 20th, 2010, 3:51 pm
- Location: San Diego
I have a 91 which is the close ratio as well and it does good in the dezert with the 14/48 gearing I run. I would run what you got and go from there.USMC 500 wrote:I will be trail riding with it.......Don't care too much about racing at top speed across the desert. I don't want it to be a dog either....freeride588 wrote:What are you using the bike for
Kevin
sounds good.....I have the 14 tooth front and I have a 50 tooth on the rear right now.freeride588 wrote:I have a 91 which is the close ratio as well and it does good in the dezert with the 14/48 gearing I run. I would run what you got and go from there.USMC 500 wrote:I will be trail riding with it.......Don't care too much about racing at top speed across the desert. I don't want it to be a dog either....freeride588 wrote:What are you using the bike for
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm