Building Tips, Suspension Set Ups, Conversion Parts .... Build to your Heart's Content!
AlisoBob
"Hoon-father"
Posts: 15405 Joined: May 31st, 2007, 6:39 pmLast active: Location: Aliso Viejo Ca
Post
by AlisoBob January 22nd, 2012, 9:08 pm
http://www.patriotracingexhaust.com/testimonials.htm
I recently hooked up with the owner of Patriot Exhaust, and he was excited about supplying us pipes for
CR500 Steelies
CR500 A/F conversions with the rear tab included, but unwelded
CR500 "125" based conversions.
Price is in the $275 range, for a custom , hand made pipe.
Anyone interested?
Here is some of his Two Stroke work
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 22nd, 2012, 10:21 pm
Sign me up for a 125 based pipe
Kuma
Posts: 854 Joined: February 7th, 2010, 8:26 pmLast active: Location: Norco, Cali
Post
by Kuma January 23rd, 2012, 12:48 pm
Did they change their name recently?
asteroid500
Posts: 1047 Joined: January 5th, 2009, 1:29 amLast active: Location: Australia Melbourne
Post
by asteroid500 January 23rd, 2012, 1:34 pm
Im in for a G-1 with a 91 engine.
"not speeding officer".....qualifying
Kuma
Posts: 854 Joined: February 7th, 2010, 8:26 pmLast active: Location: Norco, Cali
Post
by Kuma January 23rd, 2012, 1:49 pm
Kuma wrote: Did they change their name recently?
answered my own question:
Power Pros Racing Exhaust
817 S Lakeview Unit J
Placentia, CA 92870
Hellbear
Posts: 2255 Joined: June 13th, 2007, 8:14 pmLast active: Location: Richmond Hill, GA
Post
by Hellbear January 23rd, 2012, 1:53 pm
What's the price range they are looking at?
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 23rd, 2012, 10:41 pm
I am going by there tomorrow. They are very close to home. I will post the price quote I get.
AlisoBob
"Hoon-father"
Posts: 15405 Joined: May 31st, 2007, 6:39 pmLast active: Location: Aliso Viejo Ca
Post
by AlisoBob January 24th, 2012, 6:02 am
Mention to the owner that this is reference to the conversation he had with me on sunday, at the Industry Speedway BBQ.
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 24th, 2012, 7:55 am
Will do.
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 24th, 2012, 4:40 pm
Stopped by there today. Met Don, seems like a good guy. He said I would need to bring my bike over so he could check to see how much work it will be to make a pipe. Next week, he is avaliable to take a look. Did not mention any price till he sees the bike. Will keep everyone posted. If it works out, I can pick up for those not so close and ship.
AlisoBob
"Hoon-father"
Posts: 15405 Joined: May 31st, 2007, 6:39 pmLast active: Location: Aliso Viejo Ca
Post
by AlisoBob January 24th, 2012, 5:07 pm
Good job Bob....
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 24th, 2012, 8:47 pm
When I mentioned your name, he knew right away your conversation.
2strokeforever
Posts: 1524 Joined: November 13th, 2009, 1:04 pmLast active: Location: Vernon B.C Canada
Post
by 2strokeforever January 24th, 2012, 10:02 pm
this would be a good chance to clone the FMF fatty
the 450 will have less power and will be harder to start, and will be heavier, but to make up for it it will require more maintenance.
other
Posts: 338 Joined: January 25th, 2010, 5:11 amLast active: Location: Perth Hills, Western Australia
Post
by other January 24th, 2012, 10:38 pm
2strokeforever wrote: this would be a good chance to clone the FMF fatty
That happens, I'm in . . . . .
Roostius_Maximus
Site Admin
Posts: 4641 Joined: November 16th, 2007, 3:24 pmLast active: Location: Mt Nebo, Manitoba, Canada
Contact:
Post
by Roostius_Maximus January 25th, 2012, 6:12 am
same here. I know where theres some inventory to clone
hoofarted
Posts: 2628 Joined: July 2nd, 2007, 8:48 amLast active: Location: Rancho Cucamonga, CA
Post
by hoofarted January 25th, 2012, 10:38 am
Roostius_Maximus wrote: same here. I know where theres some inventory to clone
I may have an extra to loan for the cloning process if this pans out....
The CR500 is an acquired taste. If you don't like it, acquire some taste...
Roostius_Maximus
Site Admin
Posts: 4641 Joined: November 16th, 2007, 3:24 pmLast active: Location: Mt Nebo, Manitoba, Canada
Contact:
Post
by Roostius_Maximus January 25th, 2012, 10:44 am
Word is that he has a pipe he's designed.
asteroid500
Posts: 1047 Joined: January 5th, 2009, 1:29 amLast active: Location: Australia Melbourne
Post
by asteroid500 January 25th, 2012, 12:38 pm
I hope this doesn't become a billet covers saga!
Toung in cheek ...
"not speeding officer".....qualifying
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad January 31st, 2012, 6:50 pm
I dropped my 125/500 off at Patriot today. Don spent a good amount of time looking things over. He said he had some ideas to make a pipe that clears the 125 frame. After he gets a ways in, I told him I will bring the CRF chassis bike and CR250R chassis over to test fit them all. I will post progress as it goes.
pstoffers
Posts: 1652 Joined: May 31st, 2007, 8:04 pmLast active: Location: Oakdale, CA
Post
by pstoffers January 31st, 2012, 8:08 pm
other
Posts: 338 Joined: January 25th, 2010, 5:11 amLast active: Location: Perth Hills, Western Australia
Post
by other February 12th, 2012, 4:02 pm
Any update here ? Or do I sign up for the Fatty group buy ?
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad February 12th, 2012, 5:26 pm
I have been by the shop. He has been working on a 4st exhaust for some magazine reviews. He will be on it shortly. He already has the cones ready for fitment. Looks good to me so far.
Gravel Scratcher
Posts: 278 Joined: September 20th, 2009, 8:45 pmLast active: Location: Australia, Central QLD
Post
by Gravel Scratcher February 13th, 2012, 1:45 am
Are they doing a stock mount for the steely ?
if there's one thing dad likes more than serenity… it's a two stroke engine on full throttle!
cmotodad
Posts: 329 Joined: February 8th, 2010, 4:17 pmLast active:
Post
by cmotodad February 13th, 2012, 6:42 am
He has a pipe design that is originally for a steel framed 500. I can check to see if he offers them for sale. I do not see why he would not.
Bone Crusher
Posts: 7 Joined: December 9th, 2008, 11:14 pmLast active:
Post
by Bone Crusher March 9th, 2012, 7:11 pm
Whats the story on the pipes. I could use one for the Gen 3 conversion.
