start of my motard build....
start of my motard build....
bought it for 350$
got it bonded
will have street title in a week or so
started w/ pulling engine
needs crank rebuilt and top end done (rod kit/piston kit on the way then off to ERIC GORR)
cleaned/painted frame
will do a full graphics kit so not to worried about plastics
will be red/white/blue when done. tried that anodized paint yesterday and it comes out SWEET if ya spray if over alum. paint/silver paint/chrome aluminum...
1st day i had it
cleaned/painted frame
had to go back together for inspection at DMV
20mins later
1/2hr later
45mins later
OPEN UP AND SAY AHHHHHHHHH
all cleaned up and ready for crank
love this seat
saved my self a ton of money on aftermarket triples...
got it bonded
will have street title in a week or so
started w/ pulling engine
needs crank rebuilt and top end done (rod kit/piston kit on the way then off to ERIC GORR)
cleaned/painted frame
will do a full graphics kit so not to worried about plastics
will be red/white/blue when done. tried that anodized paint yesterday and it comes out SWEET if ya spray if over alum. paint/silver paint/chrome aluminum...
1st day i had it
cleaned/painted frame
had to go back together for inspection at DMV
20mins later
1/2hr later
45mins later
OPEN UP AND SAY AHHHHHHHHH
all cleaned up and ready for crank
love this seat
saved my self a ton of money on aftermarket triples...
Looking Good! What color is that on your triple tree? Candy red??
AFC Build link
http://www.bannedcr500riders.com/board/ ... 220#106220
"Real success is finding your lifework in the work that you love" (David McCullough)
http://www.bannedcr500riders.com/board/ ... 220#106220
"Real success is finding your lifework in the work that you love" (David McCullough)
officially been tarded... took 5" off..
as it sits now
engine is at JERRY HALLS for his magic...
should have it back next week sometime... then finish assemble of motor, put in bike, and fire this bad boy off for a second or two...
took my buzzy wheels to the swing arm/frame guards to give that brushed look...
mounted up an R1 master to use with the 320mm front disc i will be getting... still need resy cup....
motor all ready for crank then finall assembly....
gonna repaint cases gloss black once crank is in and sealed up....
as it sits now
engine is at JERRY HALLS for his magic...
should have it back next week sometime... then finish assemble of motor, put in bike, and fire this bad boy off for a second or two...
took my buzzy wheels to the swing arm/frame guards to give that brushed look...
mounted up an R1 master to use with the 320mm front disc i will be getting... still need resy cup....
motor all ready for crank then finall assembly....
gonna repaint cases gloss black once crank is in and sealed up....
its only temp till i can get the 17's...... plus the sprockets gonna go away anyways.... need to get the 41 for the back. so when i do ill just leave it alum.. color....AlisoBob wrote:qkenuf4u wrote:now sure how i feel about the red/blue together just yet....
The painted spoke nipples look negro.....
got tires, got plug, got gas, fired off in about 10 kicks (youre right you have to get FULL KICKS or it aint startin )
needs the pipe sealed, needs the carb tuned, needs bunch of little stuff before i can ride it/break it in... atleast i can torque the cylinder/head now.
my question is i added a 1/2 gallon AV GAS to the 91 octane. will that screw it up big time jetting wise ?
its got a 170main in it now
55 pilot
1 1/2 turns out (tried 3)
not sure on needle will have to check that
600 ft elevation (dry/low humidity/70-80*)
guy i bought carb from said it didnt idle for him so i knew i would have to play.. thats ok i like learning new stuff (i am a sorta kinda newbie bike tech)
really not satisfied with how it looks at this time. will work on that as i can.
thanks
lance
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
yep thats the one.. now ya gonna tell me that it wont idle cause the bridge is gone ??100hp honda wrote:sweet . is that the one you took bridge out ?
oh and now thats its all together the red sprocket needs to go. (will be alum. when i get my new rear sprocket) and it will have black rims once i get the 17's for it....
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
ya thats what i figured but its in better shape than mine (wore out needle jet in my old one) and gives me the bigger pilot n main i need for the break in and pipe (maybe)100hp honda wrote:bridge dont have nothing to do with it. used carbs are risky investment if you buy it sight unseen and dont know its history. just have to mess with it and see what happens
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
got an R6 kickstand from a friend thats got a junk/parts pile behind his house... CR now has a kickstand.. only cost me about 5$ in parts but most of the day grinding/drilling/running around getting stuff from hardware store etc...... it turned out great but sticks out way to much when up :headshake no way around it if ya want the bike to lean over any and not fall to the other side... :headscrat
i used the R6 mount and drilled my frame, bought a steel spacer, tapped it with a 8mm thread and welded it into the frame..used the stock chain roller hole for the back mount. its def. strong enough to hold the bike but i would never try using it to kick start the bike.
i used the R6 mount and drilled my frame, bought a steel spacer, tapped it with a 8mm thread and welded it into the frame..used the stock chain roller hole for the back mount. its def. strong enough to hold the bike but i would never try using it to kick start the bike.
Last edited by qkenuf4u on November 3rd, 2010, 6:58 pm, edited 2 times in total.
lol thats the nice thing about it. i have like 5$ in parts in it and a couple hours time (i have a welder and already had the metal/bolts to build the mount).... and after modding my mount it is PERFECT now and more than sturdy enough to hold the bike up fine. i wont ever need to use the kickstand to start it so no worries there....TYSTYX wrote:I would have spent the money for a Pro Moto billet kickstand.....
got the parts i needed to finish drive train over the weekend (other than shifter seal-ON ITS WAY) and was able to do a quick break in run around the block a couple times...... runs really nice, prob. needs a bit more carb tuning but actually works pretty well .... def. need to gear it up a bit , 5th gear wheelies are not a good thing in this town (way to many cops) and it wants to come on the pipe at cruise.....
did a mid throttle plug chop on my last run down the hill and it looks perfect..
did a mid throttle plug chop on my last run down the hill and it looks perfect..