1985 rebuild/mod
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
1985 rebuild/mod
IHi iv been on another site similar to this but annyway here's waht I'm doin I have a 1985 that I got for $700 and rode it down from crownking when a head gasket blew or was blown and caused the rads to clog and the bike overheated it made the head and studs to be come one piece so I have to remove the motor to knock the head off some of the mods I'm doin is updating the front forks to the 89 style swaintec coating on the piston and clean up and match the ports and relive the bridge the whole frame will be painted flash red the rims well be cleand up and the jug sand blasted and then coated with a clear enamal to keep the shine and the head well be annodized red with polished stud nuts some currently the frame does not want to let the engine go the swingarm piviot bolt well not budge so
I'm soakin it in wd 40 and removing the shock and rear tire to help get any pressure off the bolt well see how that works I'm open to suggestions so tell memwhat you think
I'm soakin it in wd 40 and removing the shock and rear tire to help get any pressure off the bolt well see how that works I'm open to suggestions so tell memwhat you think
Re: 1985 rebuild/mod
I can smell a web-rider from a mile away...1ugly85cr500 wrote:the jug sand blasted and then coated with a clear enamal to keep the shine and the head well be annodized red with polished stud nuts
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
Web rider? The enamal is high temp it says 600*f on the can iv used simlar paint on exhaust pips and had no burning of the paint and I will ride the bike it won't be a garage queen that's what my next bike well be
Last edited by 1ugly85cr500 on May 4th, 2010, 11:57 am, edited 2 times in total.
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
-
- Posts: 9
- Joined: June 28th, 2008, 12:09 pm
C'mon Clyde you know who he is and how he was lambasted for his spelling and punctuation over on Traces site , You even asked everyone to leave him alone , Chumly you better step it up or they will eat you alive over here. No Dis to this site but peeps speak there mind here and that generally dont fly over there. Damn I love Beams recipe , AHHHH .
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
no
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
chumly you know how to use ebay ? wheel bearing kits are plentiful there
rear
http://cgi.ebay.com/ebaymotors/REAR-WHE ... ccessories
front
http://cgi.ebay.com/ebaymotors/Front-Wh ... ccessories
rear
http://cgi.ebay.com/ebaymotors/REAR-WHE ... ccessories
front
http://cgi.ebay.com/ebaymotors/Front-Wh ... ccessories
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
1. Your asking in the wrong forum....
2. I found this is 4 seconds...
http://cgi.ebay.com/ebaymotors/1985-198 ... ccessories
Were not here to wipe your ass......
Your spelling and grammar are all fucked up because your parents havent made you do shit, or made you attempt to accomplish a thing since you fell out of your momma's snatch....
Now your trying the same thing here because your a lazy pile of shit.
Sorry if I burst your bubble on life.
If YOU posted the ebay link, and ASKED if this was a good deal, or if anyone had the same thing gathering dust out in the garage and wanted to get rid of it we wouldnt be all over your ass....
But down the bong, stop beating off, go wipe your nose, and just once.... TRY to do something productive today.... and stop just taking up space on our website.
2. I found this is 4 seconds...
http://cgi.ebay.com/ebaymotors/1985-198 ... ccessories
Were not here to wipe your ass......
Your spelling and grammar are all fucked up because your parents havent made you do shit, or made you attempt to accomplish a thing since you fell out of your momma's snatch....
Now your trying the same thing here because your a lazy pile of shit.
Sorry if I burst your bubble on life.
If YOU posted the ebay link, and ASKED if this was a good deal, or if anyone had the same thing gathering dust out in the garage and wanted to get rid of it we wouldnt be all over your ass....
But down the bong, stop beating off, go wipe your nose, and just once.... TRY to do something productive today.... and stop just taking up space on our website.
Last edited by AlisoBob on May 10th, 2010, 6:08 pm, edited 2 times in total.
EBAY BOY EBAY
http://cgi.ebay.com/ebaymotors/86-honda ... ccessories
http://cgi.ebay.com/ebaymotors/1985-198 ... ccessories
http://cgi.ebay.com/ebaymotors/1985-Hon ... ccessories
90117-KA3-831 is the part number you need
Go here and put that number in the box on the right hand side (quick parts look up) and it will tell you all the other bikes that part fits!
http://www.hondapartspitstop.com/pages/ ... Honda.aspx
http://cgi.ebay.com/ebaymotors/86-honda ... ccessories
http://cgi.ebay.com/ebaymotors/1985-198 ... ccessories
http://cgi.ebay.com/ebaymotors/1985-Hon ... ccessories
90117-KA3-831 is the part number you need
Go here and put that number in the box on the right hand side (quick parts look up) and it will tell you all the other bikes that part fits!
http://www.hondapartspitstop.com/pages/ ... Honda.aspx
88CR500
ROOST ON PEOPLE!!!
ROOST ON PEOPLE!!!
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
I'm sorry I don't like eBay I lost $350 on there but if that's what it comes too I did do some searchin for the part and for your info I have two jobs and keep our house hold runnin my dad works 50+hrs my brother smokes dope I did do it once and it almost killed me it but me in the hospital so quit with the pot jokes I have horrible spelling and grammer my fault so let's get over that I am working on it. Cant wait my freinds factory team is coming over and there going to remove the god forsaken bolt and then this project well get movin fast so I'll just postin pics of progress.
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
-
- Posts: 37
- Joined: February 4th, 2010, 4:19 pm
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
I use to hang out in some unusual places...i've had my jeans fixed since then....
Bob go easy on the lad.....he could be a Latvian born American living in Harlem....whos to know his background...
OH ugly were can i get some of that hospitalization weed from...i realy need to get ALL FUCKED UP
Bob go easy on the lad.....he could be a Latvian born American living in Harlem....whos to know his background...
OH ugly were can i get some of that hospitalization weed from...i realy need to get ALL FUCKED UP
"not speeding officer".....qualifying
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)
CR250 97
CR500 AF 99 (in progress)
CR500 AF CR G-4
CR500 1985 true legend
RGV250 96 X2
GSXR600 07 TRACK BIKE
VH Commadore cup car (race)