BannedCR500Riders.com

can this be used as a replacment for the gasket/orings at the head?....where the pipe slides onto the flange? .....by the springs...

I tried o-rings but it was spitting them out of the silencer when it was idling...

I can see the light at the end of the tunnel with this project.

last night I got some much needed honda bits.

I can see a zip up/down the street in about a week....

I just spent a few days freezing my pipe. It works SLOWLY. I was expecting to pop it out in one freeze. My pipe has several dents and was mis-shapen (staring to flatten tawords the outlet) and with the freezing it got better. Better to the point of more useible. I froze it 3 times with partial thaws...

http://www.atkusa.com/atk/(S(vq44jv45qz235k55b0vrg445))/documents/2009ATK700620cc.pdf

I dont know how to make that link work. if you go to products and find the 2009 intimidator.

of course, newer and liquid cooled...but to my knowledge these motors are maico.


I still wouldnt buy one....

well...ring endgap was at .065mm and ended up at .018mm after the new set of rings. This will be 'temporary' as I want to sleeve this cylinder back to std bore and plate it so it's a little more resiliant. I love doing top ends in my 125 (01 YZ) cause the cylinder is always perfect, cause it's plate...

you will have tons of roomm above the frame for gas tank. Those SS use sport ike looking faux tanks. I.e. A cover

Im new to MMA and whatnot....the things Iv heard and vids iv seen of brock are the opposite of what I saw in last nights fight. glad I didnt shell out $45 bones to PPV it.... fight linky... http://www.worldstarhiphop.com/videos/video.php?v=wshhlZtFcqLk94IT361K edit-did OP post a link? for some reaso...

Alright. Im lagging on this write up but Im good now. Here goes 1lb shrimp 1lb bacon BBQ sauce-good stuff preffered, lame BBQ sauce sucks. -cut the bacon. Slice it in half the long way AND slice it in half the short way. so 1 piece of bacon creates 4 smaller pieces. https://bannedcr500riders.com/ima...

today I rebuilt ALL the shock linkage and assembled some bits to make it a roller. I also tidied up the garage, hung more shelves and another light fixture. This week will I will service the top end and start "final" assembly, although I still need some parts. But the motor can go in and s...

Mounts welded...

Head stay is next

I need a swing arm OH kit.

Motor rebuild parts will be in monday, ill pick up saturday

I serviced the shock saturday and cleaned up/honed the cylinder


Slowly but surely....

hand grenande...on burbon st in N.O......i got plastered on 2 but I was a kid (maybe 17 or 18) supposedly everclear and a powder mix... Prolly the 40 proof thoug...

hand grenande...on burbon st in N.O......i got plastered on 2 but I was a kid (maybe 17 or 18) supposedly everclear and a powder mix... Prolly the 40 proof thoug...

...

I hear ya

money is a concern right now. I cant afford to completely build the motor right now My plans are to finish the project (running/riding) and reassess after that. I understand the risk....

I set myself a tentative completion date of nov 1...

TAKE 2! I sold the first project (almost 2 years ago) unfinished and am finally in a spot to FINISH one. My girlfriend and I now have a house and I dont feel so rushed. Heres where I started, this time. I see a 1997 cr500 running/complete and a blown up 98 cr250 on craigslist for 1800 bucks. fair pr...

+1 on mounts and headstay

Im doing my 2nd gen 1 (first one ran out of moolah so I sold it) and am more than capaeable of making mounts from scratch but buying them is easy. I like easy

SOLD!

bump...still available?


edit-250 not 500 my bad......nevermind

This is my bike.

I wasnt the genius that cut the side panel BTW...Im not sure what purpose cutting them served....

Iv got a guy locally that wants the roller. Ill be parting the rest.....

Anybody need parts?

...Due to lack of interest.....MY interest/motivation has been re-ignitied and I plan on keeping the bike and finishing it and then losing my liscence shortly after...

Thanks

Im regrouping to buy a new bike. My two current bikes must go. http://denver.craigslist.org/mcy/1087377846.html <---pics here 1998 Colorado TITLED CR250 -frame has been done -motor will be finished being built this week (freshened stock) -needs silencer/ignition/hoses/misc I may consider parting it....

Im changing things up and moving. Maybe. I would have a longer commute-40 mins compared to 20. I have not had my Gen 1 on the road yet (or even finished the stupid small stuff I have left to complete the project). Can a CR500 go 80MPH comfortably? This will most likely be nothing but a commuter bike...

Wet the nipple on the water pump with anti-freeze, push hose on, tighten clamp. Drink beer. Finished. I think this is inaccurate. Should be... Drink beer. wet nipple. drink beer. push hose onto nipple. drink beer. tighten clamp. drink beer. then drink a celebratory beer. But thats probably why my p...

I scored a '97 standard bore cylinder from a running bike (good running says the owner) for $50 last night. This project is getting closer to being finished.

Understood.