Silverwood , Tomorrow 5-20
Silverwood , Tomorrow 5-20
Me
Mad Dog
?????
Mad Dog
?????
-
- Posts: 151
- Joined: June 27th, 2007, 7:13 pm
- Location: Mission Viejo, CA
Mad Dog was having Magura trouble...
Mike, follow these bleed instructions....
http://bannedcr500riders.com/board/viewtopic.php?t=249
Mike, follow these bleed instructions....
http://bannedcr500riders.com/board/viewtopic.php?t=249
It's working now. MSM fixed it up and walked me through it.
Still doesn't feel like it's disengaging completely.
Not sure about these Magura's, cost me a day of riding.
Never had problem with a cable.
Still doesn't feel like it's disengaging completely.
Not sure about these Magura's, cost me a day of riding.
Never had problem with a cable.
'We are motorcycle people; we walk tall and we laugh at whatever’s funny. We shit on the chests of the Weird….' HST
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
I need to run an extra spacer under my slave cylinder for it to disengage properly, I drilled out a 1/4" 6mm socket and used that under the magura spacer to move the slave up and give it some more pull.
Coolness list by 90cr500guy
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
Bob's = 50/50
Cepek = cool
Solidbro = cool
Brit = loser
Stoffer = 1 up from Brit
MFDB = cool
Danny = ok
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
My new Magura worked just fine out of the box.
The only adjustment is the clutch lever thumb screw.
I only had mine on for a few rides now, and works great. I did have to adjust mine a few times while riding but that was probably due to the engine warming up.
I figure when the clutch is worn it would act that way.
Al
The only adjustment is the clutch lever thumb screw.
I only had mine on for a few rides now, and works great. I did have to adjust mine a few times while riding but that was probably due to the engine warming up.
I figure when the clutch is worn it would act that way.
Al
No longer have a CR500.
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo