AlisoBob's Gen 4 A/F Conversion

Post by **AlisoBob** » October 12th, 2007, 8:04 am

Craigslist = Goldmine

$20 + $10 shipping!!!

Post by **AlisoBob** » October 16th, 2007, 8:26 pm

Well ,here she is .... all ready for welding tomorrow. Maybe I will make it to Glamis with her?

Motor fits the cradle very well. Any gaps you see are probably " Sharpie" marks.. There are no "Butt Welds" anywhere. The tubing either is fitted into a socket and indexs together about 1/2", or has a 3" piece of 3/4 solid bar inside, and will be plug welded.

Pipe hugs the "Y" nicely, and the radiators fit with no issues.

The lower tabs are 1/4" 6061 T6... look across the frame and you can see one of the lower plug weld holes.

Close up of the "Y". Lots of room for the coolant crossover hose, exhaust springs, and everything else.

I'll post some more when the real motor is in, and the accessories are getting hooked up!

HrcRacing · Post by **HrcRacing** » October 16th, 2007, 8:42 pm

Man, that went together really nice. Very clean Bob. Good job!

Post by **AlisoBob** » October 16th, 2007, 8:48 pm

Thanks!

Ported&Polished · Post by **Ported&Polished** » October 16th, 2007, 9:20 pm

That is cool, but there is no way in hell you are gonna have that thing done for Glamis.

sabreguy · Post by **sabreguy** » October 16th, 2007, 9:51 pm

Looking sweet Bob!!

britincali · Post by **britincali** » October 16th, 2007, 10:10 pm

Post by **AlisoBob** » October 17th, 2007, 12:19 am

Rads fit well

Chain alignment is off, motor needs to move left. This is with Gen 3 250 spacers in there.

Lookin Good! It will absoulutly be there Terrence, providing the tank and airboot dont take too long to fab. Judging from Danny Graves photo's, this air boot is going to seal perfect, or the bike isnt coming out to play in the sandbox.

pstoffers · Post by **pstoffers** » October 17th, 2007, 7:00 am

Looks sweet Bob, Now get er done!!!

lewisclan · Post by **lewisclan** » October 17th, 2007, 7:33 am

SWEET

dannygraves · Post by **dannygraves** » October 17th, 2007, 7:43 am

niiice!

britincali · Post by **britincali** » October 17th, 2007, 7:52 am

Nothing better than a big hunk of high HP ally sitting in the shed

HrcRacing · Post by **HrcRacing** » October 17th, 2007, 11:39 am

Damn you do good work Bob.

ellett · Post by **ellett** » October 17th, 2007, 5:19 pm

AlisoBob wrote:
Chain alignment is off....

You sure that chain isn't just rusted into that shape?

Did Hellbear hook that thing last time he went fishing, or did it come with the motor (since they match)?

Post by **AlisoBob** » October 31st, 2007, 3:49 pm

Shitty cell phone shot

Trick or Treat?

This is all you get until I get my real motor installed.... Check back Sunday!!

Ported&Polished · Post by **Ported&Polished** » October 31st, 2007, 6:39 pm

Ride ride ride rocket ride!

redridermv · Post by **redridermv** » October 31st, 2007, 7:38 pm

Hey Bob,
Let me know when you are ready to take the AFX out for the first shake down ride...

HrcRacing · Post by **HrcRacing** » October 31st, 2007, 7:40 pm

That looks great Bob, even with the shitty phone camera.

lewisclan · Post by **lewisclan** » November 1st, 2007, 6:15 am

is Dumont going to be the 1st ride ?

Hellbear · Post by **Hellbear** » November 1st, 2007, 7:49 am

Nice Bob, she's looking good.

Post by **AlisoBob** » November 1st, 2007, 11:08 am

I got a few pm's wanting a better photo.... here's a "sneek peek"... The motors in, you wont believe how OEM it looks....

No misaligned billet pieces..

No " The bigger the glob, the better the job welds..."

No " Rhacks" quality work...

ANYBODY can reproduce this with a sawsall, a die grinder, and some good ol' fashion Hoon attitude! No bending or trick machinery needed...

I'll post some more when its 90 % assembled.

pstoffers · Post by **pstoffers** » November 1st, 2007, 12:17 pm

Looks good Bob......

ShanMan · Post by **ShanMan** » November 1st, 2007, 12:37 pm

...the student has become the MASTER! Very clean, very nice work Roberto!

Post by **AlisoBob** » November 1st, 2007, 12:41 pm

Senior Billys is fitted, and only needs welding...

It will be shipped very soon!

I am taller than you!

tadiv · Post by **tadiv** » November 1st, 2007, 1:59 pm

AlisoBob wrote:Senior Billys is fitted, and only needs welding...

It will be shipped very soon!

I am taller than you!

But he has the stache!

BannedCR500Riders.com

AlisoBob's Gen 4 A/F Conversion