Page 1 of 1

swingarm problems

Posted: February 20th, 2010, 12:56 pm
by hillclimbjim
broke our swingarm in half today, i have 96 will every thing bolt up to a 90 frame and linkage,i have the 96 shock also if there diffrent. thanks

Posted: February 20th, 2010, 1:09 pm
by CR500R7
Should do, I think its the same swingarm, its the linkages that changed over the years.

Posted: February 20th, 2010, 1:23 pm
by hillclimbjim
the linkage is from the 90, the chain slide is bigger and the hole is a little off

Posted: February 20th, 2010, 1:35 pm
by CR500R7
hillclimbjim wrote:the linkage is from the 90, the chain slide is bigger and the hole is a little off


I think you are saying the chain slider is wider / longer and the bolt hole for the chain slider doesnt line up.

This is always the tricky part when you start to change between the years, the swingarm maybe the same but everything that connects to it has changed which means you need to swap all that shit with it or start modifying crap.

Posted: February 21st, 2010, 5:22 pm
by seanmx57
I got a 91 swingarm here with good linkage, you could swap it out for the 96.......

Re: swingarm problems

Posted: March 5th, 2010, 8:46 pm
by M.F.D.B.
hillclimbjim wrote:broke our swingarm in half today
:shock: :shock: :shock: :shock: :shock:

Posted: March 5th, 2010, 10:24 pm
by pstoffers
I got a 90 swingarm

Posted: March 5th, 2010, 10:45 pm
by hagendog
I got 2, where are you located? Don't know what years they are, mid 90's