Page 1 of 1

01 CR250 rear shock questions..

Posted: August 14th, 2008, 8:53 pm
by plick_99
you all helped so much whith the forks I though I would hit you up with some questions about the rear shock.
I bought a new spring and have no idea how to change the old one out.
I cant find anything in my manuals to help so Im hoping one of you can clue me in on how to change the oil and spring?

Posted: August 14th, 2008, 9:36 pm
by redrocket190
Image
Basically you have to back off all the pre-load (5,6) so the spring is not under any compression. Then turn the shock upside down and with a buddy's help use some tire irons or similar to compress the spring just enough that the C-clips (21,31) at the bottom pop out. Now the spring will slide right off.

It's much easier with this...
Image
and this...
Image

As for changing the oil. This is straight-forward with a manual but you'll need to find somewhere to charge the reservoir with Nitrogen. I would send the shock to Race Tech and pay for an oil change. They'll put the correct spring on at the same time.

Posted: August 15th, 2008, 8:02 am
by dannygraves
I loosen up the adjusters all the way off the threads, then push the spring up. then you tap the little cup shaped thing that holds the spring up which will reveal a locking ring you can pull out, then pull that retaining peice out and the spring slides right off. very simple.