what bars are you guys running
what bars are you guys running
I hae protaper reeds but I think the cr highs would be a better fit.
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
have any of you guys used the KX high (its a lot higher than all the rest)?
has anyone used the protaper EVO bars? I'm gonna be buying some bar tomorrow probably.
I was thinking about the woods high, looks very similar to the cr high, but longer strait tubes for brush guards and other accessories.
has anyone used the protaper EVO bars? I'm gonna be buying some bar tomorrow probably.
I was thinking about the woods high, looks very similar to the cr high, but longer strait tubes for brush guards and other accessories.
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
i have the CR high on my AF, its all i have ever used. i will probably be buying a woods Hi for my next set, they are 30.5" already and thats what i cut the CR highs to. i have thought about the pastrana FMX bar, its alot taller than the KX high, already at 30.5" and pretty straight also.
TJ
2005 cr500af
2008 300XC/w
2005 cr500af
2008 300XC/w
- teemtrubble
- Posts: 2269
- Joined: October 11th, 2007, 2:15 pm
- Location: simi valley, ca
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
- iggys-amsoil
- Posts: 3602
- Joined: June 1st, 2007, 6:09 pm
- Location: Just North of March Airfield CA
- redrocket190
- Posts: 1229
- Joined: September 17th, 2007, 9:07 pm
- Location: San Clemente, CA
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
hhhmmmmm, I like what I read about them, what kind of price can you hook a hoon up with on the CRF/KXF/RMZ 9710 in nitride finish?teemtrubble wrote:Sunline AV ONE OSX. KX/YZ/RMHI 7640 BEND OR THE CR HI BEND Check these out they work and I'm a dealer!
'09 kx450f 4-Poke
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
Gen-4 trail bike --SOLD--
Gen-3 badass trail/mx bike --SOLD--
Gen-1 built dunes bike --SOLD--
'05 klx110 --SOLD--
'95 pw80
- teemtrubble
- Posts: 2269
- Joined: October 11th, 2007, 2:15 pm
- Location: simi valley, ca
I have the Pastrana FMX's on mine. I'm really happy with the bend and height, but I need to put them a little further forward so I bought a set of these:TJC510 wrote:i have the CR high on my AF, its all i have ever used. i will probably be buying a woods Hi for my next set, they are 30.5" already and thats what i cut the CR highs to. i have thought about the pastrana FMX bar, its alot taller than the KX high, already at 30.5" and pretty straight also.
http://www.barrisersonline.com/forwardrisers118.html
I should have them on the bike in a couple weeks, and I'll report back with findings.
Definitely, I'm going riding again over Memorial day weekend in Pittsburgh with some friends, I should have 'em on the bike by then.
Just from looking at the dimensions, they appear to accomplish the approximate same geometry as a set of pivoting Rox Risers rotated forward, however there's no danger of them being smacked out of adjustment in the event of a big wreck. Since I'm accident prone, I figure it was worth a try.
Just from looking at the dimensions, they appear to accomplish the approximate same geometry as a set of pivoting Rox Risers rotated forward, however there's no danger of them being smacked out of adjustment in the event of a big wreck. Since I'm accident prone, I figure it was worth a try.
question for yall. got my cr-high bars from pro taper. and boy are they sweet. question i love the bend and everything but they are a britincali hair longer than my henry reeds. can you cut off the ends? like .5 of an inch on either side. i am a little guys so i have narrow shoulders. this is why i hate the carmichel bend. i was looking at them and dont see a problem but i thought i would ask first. measure twice cut once. lol
-
- Posts: 1898
- Joined: June 23rd, 2007, 12:47 pm
- Location: Prescott
- redrocket190
- Posts: 1229
- Joined: September 17th, 2007, 9:07 pm
- Location: San Clemente, CA
I remember reading years back you do push-ups and move your hands in and out until it feels most comfortable. That's the spacing you should use for your bars, and you cut them to size. I am on the left-side of the size distribution curve so I cut 1/2" of the ends.
Michael Stiles
2007 Honda CR500R-AF
2007 Honda CR500R-AF