new guy here from utah( teaser pic uploaded)

cr5004life · Post by **cr5004life** » March 5th, 2008, 9:42 pm

Hey everyone, im new to the site. Figured id say hi and tell a lil about my bike. 1990 cr500 2001 plastic and sub frame

MODS: full race port K&T performance
3 mil stroker crank
cool head
custom cut dome
custom in frame drag pipe
41mm carb
30 horse shot of nos
boyesen rad valve
runs 114 octane fuel
custom powder coat
polished EVERYTHING

i use this bike as my duner and hill climb bike, i have seperate swingarms and rim an tire choices for every occasion just swap em out depending where im ridin for the weekend ill try and get a bunch of pics up asap soon as i figure out how ?

Hellbear · Post by **Hellbear** » March 5th, 2008, 9:46 pm

Welcome!

lewisclan · Post by **lewisclan** » March 6th, 2008, 5:11 am

Right on

sabreguy · Post by **sabreguy** » March 6th, 2008, 5:37 am

Welcome aboard!

Use a place like photobucket, tinypics, or putfile for your pics. Upload the pics there then link them here.

teemtrubble · Post by **teemtrubble** » March 6th, 2008, 8:18 am

Welcome

ou812 · Post by **ou812** » March 6th, 2008, 4:02 pm

Welcome

100hp honda · Post by **100hp honda** » March 6th, 2008, 4:46 pm

sweet. post some photos if you can

4Z · Post by 4Z » March 7th, 2008, 7:05 pm

Welcome!!!
yes, post pics!!
K&T does some killer turbo set ups on sleds.

ouch360 · Post by **ouch360** » March 7th, 2008, 9:02 pm

welcome

britincali · Post by **britincali** » March 7th, 2008, 9:07 pm

Hellbear wrote:Welcome!

cr5004life · Post by **cr5004life** » March 10th, 2008, 7:43 pm

[/img]

bigjay · Post by **bigjay** » March 10th, 2008, 10:40 pm

welcome! sounds and looks like you got some $$$ tied up in that beast. where did you get the crank and what supporting mods needed to be done?

cr5004life · Post by **cr5004life** » March 11th, 2008, 6:06 pm

yeah if u guys knew how much money i have tied up in my 500 u would think im nuckin futs!!!!! but happiness has no price limit lol Kim muchmore owner of k&t performance done the crank for me, He done an amazing job. I highly reccomend him. He gets alot of work from me, as he only live 20 minutes from my house. he had to change the porting a lil and the the dome. The case also requires some porting an cutting, the crank is balanced an fully welded so it doesnt come apart. But u do get a lil more vibe with a stroker crank not to bad tho. The majority of the extra 3 mill comes out of the head and the case, no spacer under the cylinder just two base gaskets. If i didnt tell anyone i had a stroker crank nobody could tell by just looking. Works out good when u just beat those damn banshees and they ask whats done to your bike and checking it over and u just tell them a head pipe and reeds lol I get a kick out of there reactions. I had some dumb ass want to race me on a crf450 i even told him id give him a head start, but no he insisted head to head he could give me a run for my money (this was without nitrous) I had time to turn around let my bike idle for a minute and shut it off b4 he cressed the hill. He couldnt believe it was only a 500 it was PRICELESS gotta love the 2 stroke king

lewisclan · Post by **lewisclan** » March 11th, 2008, 8:49 pm

4Z · Post by 4Z » March 12th, 2008, 6:55 pm

dahondaboy · Post by **dahondaboy** » March 19th, 2008, 8:19 pm

right on bro! another utah'n ! where u at? maybye we can ride together sometime. hit me up!

bsmith · Post by **bsmith** » March 19th, 2008, 8:59 pm

WELCOME

100hp honda · Post by **100hp honda** » March 22nd, 2008, 8:37 am

cr5004life wrote:
[/img]

did mike at cpi make the pipe for you? how does it work so far ?

cr5004life · Post by **cr5004life** » March 22nd, 2008, 7:06 pm

yes mike made the pipe, i love it , works really good at the dunes but it hurts your ears is LOUD

100hp honda · Post by **100hp honda** » March 22nd, 2008, 8:07 pm

cr5004life wrote:yes mike made the pipe, i love it , works really good at the dunes but it hurts your ears is LOUD

i wanted matt shearer to make me one but i doubt ill be able to get my bike down to him, so ill probly have to call mike also

cr5004life · Post by **cr5004life** » March 23rd, 2008, 6:56 pm

I had to take my bike down to him an leave it while he built the pipe, he doesnt have a jig for that pipe but i live in morgan so im only ten minutes from his shop

atank · Post by **atank** » July 22nd, 2008, 5:29 am

Welcome!

BannedCR500Riders.com

new guy here from utah( teaser pic uploaded)

new guy here from utah( teaser pic uploaded)