headstays, engine mounts, etc.

Mad Dog · Post by **Mad Dog** » May 29th, 2008, 8:10 am

My 02, Gen 3 is less than 5/8".
Measures .554", or there abouts.

lewisclan · Post by **lewisclan** » May 29th, 2008, 8:30 am

Ill be needing some when you get em done

ShanMan · Post by **ShanMan** » May 29th, 2008, 10:28 am

Mad Dog wrote:My 02, Gen 3 is less than 5/8".
Measures .554", or there abouts.

The one's that Ported test fit for me measure .542"...which is very close to your .554". Maybe I can send them to you and you can bolt them on.

I think Ported's frame is a bit different than other frames. Everything is square and tight, but the dims seem a bit different just the same.

I am leaning towards bumping the offset up to .562" and calling that a good compromise but another test-fit should confirm that. That said: mad Dog, do you want me to send you the one's Ported test-fit so you can take some goof pics?

If you're up for it, shoot me your mailing address in a PM.

Mad Dog · Post by **Mad Dog** » May 30th, 2008, 9:38 am

Yes, PM sent.

ShanMan · Post by **ShanMan** » June 9th, 2008, 9:37 am

Please see the product review section for further conversation regarding the covers. Thanks.

ShanMan · Post by **ShanMan** » July 31st, 2008, 4:31 pm

PARTS ARE IN!!!!

I have 10 gen. one kits. They include: engine mounts (pair), head stay, coil mount, swingarm spacers (pair) and cooling hose splitter. All CNC machined from billet 6061-T6 Al Aly. Price is $325 (shipped) through PayPal or $310 cash or money order.

I have 10 additional sets of hardware that I will piece out as required. I will have 10 gen. four engine mount sets and 10 gen. 3 headstays (single sided) in about 3-5 days. BTW: tapered engine mounts (gens 1 thru 3) will work fine on a gen four if you can't wait.

For broken out parts, prices (shipped) are as follows:

Engine mounts (all gens) $80/pr

Head stay (Gen. 1 or 3) $55

Coil mount (gen 1) $55

Cooling hose splitter $80

Swingarm pacers $30/pr

MY PayPal addy is: shanimal@live.com

FYI: 10 sets of "Banned" engine covers will be ready in 7-10 days.

<edit> I have bumped the prices to offset the PayPal fees as of 8/4/08

Post by **AlisoBob** » July 31st, 2008, 4:52 pm

The Gen 1 coil mount makes a bitichin Gen 4 CRF250 mount, for sticking the coil under the right number plate....

Balaclava · Post by **Balaclava** » July 31st, 2008, 6:13 pm

you would think so...my 450 coil mounts work perfect for the 500 coil...Recycling!

ShanMan · Post by **ShanMan** » August 4th, 2008, 7:02 am

AlisoBob wrote:The Gen 1 coil mount makes a bitichin Gen 4 CRF250 mount, for sticking the coil under the right number plate....

Bob, would I need to add a set of additional holes for that to be a drop-in?

Post by **AlisoBob** » August 4th, 2008, 10:52 am

It kinda' just "snaps" in there...

ShanMan · Post by **ShanMan** » August 4th, 2008, 1:16 pm

LOL....we'll alrighty then!

ShanMan · Post by **ShanMan** » August 4th, 2008, 1:33 pm

REMINDER: if you are choosing to pay via PayPal, please be sure to include a description of the parts you are ordering. I am getting payments but not being told what I am being paid for. Kind of confusing. Also, if you want to save the PayPal fee, you can pay via Money Order and mail it to me (with instructions):

Shannon Murray
7460 W. Crystal Rd.
Glendale, AZ 85308

Thanks,

Shannon

teemtrubble · Post by **teemtrubble** » August 4th, 2008, 1:38 pm

two puerto rican dancing girls and a shetland pony

ShanMan · Post by **ShanMan** » August 4th, 2008, 1:48 pm

I shipped that order this morning.

ShanMan · Post by **ShanMan** » August 7th, 2008, 7:28 pm

Hey all...I fugged up the original kit price. See my revised pricing (READ: LOWERED) in the post on page nine for the correct numbers. Sorry...and thanks!

ShanMan · Post by **ShanMan** » August 21st, 2008, 6:47 pm

hey TTM Mike...what's with a request for a refund on the pony....it was fine when it left here!

ShanMan · Post by **ShanMan** » September 1st, 2008, 3:34 pm

ALL: my prices are good for continental US destinations only. If you are in Europe, Canada or Australia, YOU WILL be paying more for shipping. Sorry.

teemtrubble · Post by **teemtrubble** » September 2nd, 2008, 9:41 am

ShanMan wrote:hey TTM Mike...what's with a request for a refund on the pony....it was fine when it left here!

I asked for a pony not a goat!

sabreguy · Post by **sabreguy** » September 2nd, 2008, 6:49 pm

teemtrubble wrote:
ShanMan wrote:hey TTM Mike...what's with a request for a refund on the pony....it was fine when it left here!
I asked for a pony not a goat!

kkvslayer · Post by **kkvslayer** » September 26th, 2008, 7:56 am

I know you guys have seen them before but these are too nice not to show off,got them yesterday

Thanks again Shanman

dannygraves · Post by **dannygraves** » September 26th, 2008, 9:16 am

kkvslayer wrote:I know you guys have seen them before but these are too nice not to show off,got them yesterday
Thanks again Shanman

SHWING!

kim · Post by **kim** » October 13th, 2008, 5:56 pm

is the af realy that much better i just finished the restoration on my 93 do i need to do it over as anf

lightning78 · Post by **lightning78** » October 14th, 2008, 10:42 am

What series aluminum are you using for these?

ShanMan · Post by **ShanMan** » October 14th, 2008, 3:21 pm

6061-T6 al aly

Balaclava · Post by **Balaclava** » October 14th, 2008, 4:01 pm

sorry i am taking so long, but i'm deffinately going to send the cash either tomorrow or thurs by the latest...i can't wait to use those mounts they look awesome...

BannedCR500Riders.com

headstays, engine mounts, etc.

af that much better