Hey guys
I got a 1989 CR500 in a '06 crf250 beer can that I recently replaced the header o rings on and took a look at the cylinder. It runs great, doesn't feel down on power at all. I see no signs of detonation, the piston wash looks good but I see some dark lines on the wall. The hatching still looks good but these are concerning. They don't seem deep at all but I thought I would ask what you guys think?
Thanks!
How does my cylinder look?
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm
I'm not sure if it is just how close the picture was taken but it looks rougher than I am used to seeing but I don't look at them through a magnifying glass and that may be the perspective these pictures were taken. I can see cross hatching for sure but they look kind of ball hone style deep...may just be the picture.
O.ne B.ig A.ss M.istake A.merica
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
Re: How does my cylinder look?
Sometimes they look rougher then they really are??
Scratches in the cylinder wall are normal. I would rather see some then none!!
I would be more worried about the bridge???
Rhino. Was up!!! Hope all is good!!!
Holding down the fort!!!
Scratches in the cylinder wall are normal. I would rather see some then none!!
I would be more worried about the bridge???
Rhino. Was up!!! Hope all is good!!!
Holding down the fort!!!
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
Re: How does my cylinder look?
Does the bridge look off? The bridge is the divider you can see in the pic that divides the exhaust outlet, right?
Thank you
Thank you
Re: How does my cylinder look?
It's the cylinder side of the bridge you need to look at. The bridge is supposed to have a bit more clearance than the rest of the cylinder since it gets hotter and experiences different thermal expansion.
Re: How does my cylinder look?
blownbillybob , if you are watching this thread, I've been trying to get in touch with you to talk about some cylinder work.