using a rekluse in an 86
-
- Posts: 2
- Joined: February 29th, 2016, 10:24 pm
using a rekluse in an 86
hello guys, i have an 86 that is all stock except for the 94 clutch cover i installed to replace the rotted water pump. after days of research im still foggy as to what i will need to fit a rekluse on my bike. it seems my 86 basket is the same as the 90+ bikes. the rekluse comes with its own inner hub, pressure plate, and steel plates. could it be that i only need the 90+ push rod, throw out bearing and spacer along with a new set of 90+ clutch fibers to make a rekluse work??? thank you in advance for your time, and my apologies if i missed a post addressing this already.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
you'll need the wider basket to make it fit.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 2
- Joined: February 29th, 2016, 10:24 pm
Originally I figured I would need a 90+ basket, but questioned the need for one when I saw a fiche that showed an 86 basket has been superseded to the 90+. Also I saw an auction from a large Honda dealer listing the same basket for 86-01 cr500. I'm assuming now, this means the 90+ basket fits as long as you also use the inner hub and push rod etc. With the wider basket.thank you again, your advice and time is appreciated.