exhaust bridge
-
2XDIRTLIVES
- Posts: 3
- Joined: November 2nd, 2014, 4:13 pm
exhaust bridge
On maddogs pics shows the bridge gone on his 500 any info on that out there, Ive had problems with mine.
-
iggys-amsoil
- Posts: 3602
- Joined: June 1st, 2007, 6:09 pm
- Location: Just North of March Airfield CA
Some remove it for full race apps.
But mostly take .003-.004 thou off after boring the cylinder. making sure the transition from bridge to cylinder is gradual, within an 1/8", and smooth.
But mostly take .003-.004 thou off after boring the cylinder. making sure the transition from bridge to cylinder is gradual, within an 1/8", and smooth.
Trinity Racing mild porting FMF
62 pilot, EGH needle, 172 main
03 Gen III CR250 frame
2013 Dodger Charger 5.7 Hemi
http://www.prisonplanet.com
Your Amsoil Customer # 350882
62 pilot, EGH needle, 172 main
03 Gen III CR250 frame
2013 Dodger Charger 5.7 Hemi
http://www.prisonplanet.com
Your Amsoil Customer # 350882
-
2XDIRTLIVES
- Posts: 3
- Joined: November 2nd, 2014, 4:13 pm
Thanks. I thought I took enough off the bridge, next time Im sending it out, but for now Im building a 500af, I mainly woods ride and with the 500 its got to be real bad to be gutless, when I bought it I ran it 2 seasons, before it started hard and found it was running on one ring, they never cut bridge!