CPI, Home of the LIGER!!!!
CPI, Home of the LIGER!!!!
http://www.cpindinc.com/
Calvin Pollet runs a small company that manufacturers high performance parts for ATV's, motorcycles, snowmobiles, and a few other uses. His company does not sell to the general public, but Calvin is on here to answer questions and tell you the closest dealer in your area if you are interested in the parts he produces.
He started with a 95mm bore in this design, and as soon as the new larger pistons are available, we could see bores as large as 106mm from this design. The CR500-Liger cylinder was designed to be used with a bolt-on adapter plate to minimize case modifications and still allow the transfer tunnel size to be increased and repositioned for optimum performance increases.
Welcome Calvin, from all the Hoons at Banned!
Calvin Pollet runs a small company that manufacturers high performance parts for ATV's, motorcycles, snowmobiles, and a few other uses. His company does not sell to the general public, but Calvin is on here to answer questions and tell you the closest dealer in your area if you are interested in the parts he produces.
He started with a 95mm bore in this design, and as soon as the new larger pistons are available, we could see bores as large as 106mm from this design. The CR500-Liger cylinder was designed to be used with a bolt-on adapter plate to minimize case modifications and still allow the transfer tunnel size to be increased and repositioned for optimum performance increases.
Welcome Calvin, from all the Hoons at Banned!
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
-
- Posts: 158
- Joined: April 22nd, 2011, 3:40 pm
I'm intrested of these big bore kits. I have plans of building a big power engine for my iceracing season here in Sweden. are the kits ready for sale complete with all that's needed? What carb is recommended to use for this package, and what power can i count on to achieve with the right pipe?
Johnny
Johnny
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Johnnys steel frame bike / Liger build is here.... http://www.bannedcr500riders.com/board/ ... hp?t=13730
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd