Gen 1 & gen 3 parts....and clutch and ignition covers

ShanMan · Post by **ShanMan** » January 14th, 2011, 2:35 pm

All,

My machinist has moved and is up and running in the new facility. While doing so, he found a drawer full of parts (to be identified shortly) that I suspect will likely be front engine mounts (with the taper for a perfect fit on gen's 1 thru 3 and will work for gen 4), gen 1 head stays, coil relocation brackets, swingarm spacers and I believe he has a few ignition covers left as well. Once I know what I have I will throw together a list and some smokin' pricing to get it all in the hands of hoons who want them.

COVERS: My machinist is primed to do a run of covers (both clutch and ignition) that can have script or can be left plain. The deal is, they will need to be prepaid for and there needs to be at least 10 sets ordered. That said, maybe we can use this post as an order form so-to-speak to see just how many people are really ready to pony up for some very nice covers vs. those that said they would and then didn't when the parts were actually made.

As before, I can bring parts (new covers excluded) to Hoonfest for those that want to buy but dont want to pay for shipping.

One last thing: Anybody interested in getting some custom rear disk guards done? I have a design done in CAD already and plan on having one machined shortly....made from 6061-T6 and super bitchin'....let me know.

Peace!

Shannon 623 523 2188

qkenuf4u · Post by **qkenuf4u** » January 14th, 2011, 2:56 pm

depending on the price i might be in on an IGNITION COVER..

lewisclan · Post by **lewisclan** » January 14th, 2011, 3:21 pm

In in on one of those too maybe 2 depending on what you have pm me when you know. Are they blank?

Gravel Scratcher · January 15th, 2011, 10:11 pm

i'll be in for a set and would like the factory honda look / style.

awarr · Post by **awarr** » January 17th, 2011, 6:06 am

I am interested in the covers pending pricing.

dubious01 · Post by **dubious01** » January 17th, 2011, 10:57 am

Interested in covers, and shark fin,

pics and prices needed to commit

script= "thumper eater" preffered.

Slomo · Post by **Slomo** » January 17th, 2011, 12:32 pm

Shannon- is that rear brake guard going to be similar to a moose or enduro engineering one with a replaceable guard?
I'm assuming you ar going to offer it for CR250's?

How much are they going to cost?
Availability for hoonfest?

other · Post by **other** » January 17th, 2011, 9:05 pm

I'm in for a pair of front mounts . . . price ?

AMA714 · Post by **AMA714** » January 18th, 2011, 10:53 am

Shanman... PM´d you

Sidetrack · Post by **Sidetrack** » January 18th, 2011, 9:07 pm

Pencil me in on a pair of GEN 1 front mounts...

seanmx57 · Post by **seanmx57** » February 7th, 2011, 7:12 am

I could use some covers

I'm at seanmx57@yahoo.com

sean

other · Post by **other** » February 8th, 2011, 1:40 am

I'm in for both clutch and ignition covers, and also a set of front mounts, if the price is right. . . .

AngryShawn · Post by **AngryShawn** » February 8th, 2011, 10:25 am

I'd be in for a set of covers if I can afford them

agent · Post by **agent** » February 19th, 2011, 10:16 pm

Again, I would love a set. Any new word on these actually being made

http://www.youtube.com/user/500bigbore · February 20th, 2011, 11:38 am

I have a set of never used "1/2 litre thumper eater" covers for sale yet

agent · Post by **agent** » February 22nd, 2011, 5:03 am

Roostius , thanks for the offer but the "1/2 litre thumper eater" logo is not what i am after, no logo or pretty much anything else would be good for me. But thanks anyway. rick

seanmx57 · Post by **seanmx57** » February 22nd, 2011, 6:14 am

agent wrote:Roostius , thanks for the offer but the "1/2 litre thumper eater" logo is not what i am after, no logo or pretty much anything else would be good for me. But thanks anyway. rick

X2

http://www.youtube.com/user/500bigbore · February 22nd, 2011, 8:56 am

no prob

ShanMan · Post by **ShanMan** » March 6th, 2011, 6:53 pm

OK gang...sorry this has dragged ass like a clapped out thumper...but, my machinist is getting divorced....I am tired of getting PM's for low ball pricing....blah, blah, blah.

So, if your interested in buying the CAD files for a STEAL, PM me or e-mail me directly at shanimal@live.com .

I have no time for this shit anymore. I have much love for you hoons, and you know who you are. So I hope one of you wants to make some parts for other hoons...I am done.

Shannon

ShanMan · Post by **ShanMan** » March 21st, 2011, 1:57 pm

**UPDATE**

Paul Stoffers has stepped up and purchased the designs for the engine covers (clutch & ignition), and every part I have designed for Gen 1 and Gen 3.

Additionally, I have taken possession of all the remaining inventory that my machinist had on hand. He will no longer be making any parts, so please contact Paul Stoffers for all future orders. Rob at EVP will NO LONGER BE SELLING CONVERSION HARDWARE.

Myself or Paul will publish the inventory list in the next few days along with pricing.

Thanks hoons,

Shannon aka ShanMan

BannedCR500Riders.com

Gen 1 & gen 3 parts....and clutch and ignition covers

Gen 1 & gen 3 parts....and clutch and ignition covers