bore & honing!!!!!
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
bore & honing!!!!!
im offering my services to anyone who wishes!
bore & hone next size over with torque plate and plateau finish $60.00 you pay shipping and supply piston.
or if you want to make a appointment i can do it while you wait !!!!!
PM me if interested
im in NOR-CAL
hope this is OK bob!!!!!
not sure if i need permission to post this?
bore & hone next size over with torque plate and plateau finish $60.00 you pay shipping and supply piston.
or if you want to make a appointment i can do it while you wait !!!!!
PM me if interested
im in NOR-CAL
hope this is OK bob!!!!!
not sure if i need permission to post this?
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
do it up
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
Re: bore & honing!!!!!
Why dont you post up some photos of your equipment, fixtures, and tooling.blownbillybob wrote:...bore & hone next size over with torque plate and plateau finish
This better not be some kind of bullshit "Ball Hone" deal....
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
Lol!!!!! I'll try and get some pics up never posted pics before might need help with that???
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
Lol!!!!! I'll try and get some pics up never posted pics before might need help with that???
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
Here's how to do it.
Copy this link, it's where you store your photos.
http://www.bannedcr500riders.com/galler ... t=0&page=5
I open the reply thread AND that thread at the same time.
Go through the motions to get a pic on that addy.
Click on last uploads and it will be there.
Click on the pic and click it again to get it larger.
Copy the LOCATION.
in your post,
That's all there is to it.
If it doesn't show up you probably forgot the /
Go ahead and try it, post a naked pic of your girlfriend.
Copy this link, it's where you store your photos.
http://www.bannedcr500riders.com/galler ... t=0&page=5
I open the reply thread AND that thread at the same time.
Go through the motions to get a pic on that addy.
Click on last uploads and it will be there.
Click on the pic and click it again to get it larger.
Copy the LOCATION.
in your post,
That's all there is to it.
If it doesn't show up you probably forgot the /
Go ahead and try it, post a naked pic of your girlfriend.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
more like .00015-.0002100hp honda wrote:whats considered acceptable work. less than .0005 difference between the largest and smallest diameter measurement ?
I check the new cylinders too, honda is within .0002
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
ya i got a new honda one laying around im going to check for the hell of it. got a couple old used ktm ones to check also. checked one already, within .0004 and i measured in about 20 different spots. have no idea the hours on it though. gotta be several years old im thinking, possibly original maybe but i dont know.Roostius_Maximus wrote:more like .00015-.0002100hp honda wrote:whats considered acceptable work. less than .0005 difference between the largest and smallest diameter measurement ?
I check the new cylinders too, honda is within .0002
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
i've had some come in that were 90mm and needing a bore, they measured like they had .004 wear, but once i get sizing them ive found them crooked, one had to go 91mmm
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
Pics of hone
Those are the plateau brush set that is on the mandrel now they are $360.00 a set
I also have stones starting 150,220,280,400,600,plateau to hone out the cyl to the proper finish
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
The torque plate is one piece steel the line you see is my locating register for when I mount it in the lathe to machine the bottom of the cyl. It just makes it easier and faster to dial in the bottom
For honig oil I use general honing mineral oil with sunnen MAN-C concentrate additive
For honig oil I use general honing mineral oil with sunnen MAN-C concentrate additive
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
So your saying she leaks maple syrup filtered threw her panties????
Now that's what I call a real Canadian AAAA!!!!!!!!!!!
Now that's what I call a real Canadian AAAA!!!!!!!!!!!
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
finish hone with 400 grit
finish hone with 400 grit and plateau
finish hone with 400 grit
finish hone with 400 grit and plateau
notice how the plateau finishes are alot more shinier then the standard finish.
if you drag your finger nail down the standard finish it feels rough and grabs your nail on the plateau finish its like sliding your nail across a piece of glass you would think the rings wouldnt seat but they do this is what a brush plateau finish should look and feel like!!!!
heres one of my exhaust ports
the center bridge looks crooked as fuk in the pics but is really pretty strait
finish hone with 400 grit and plateau
finish hone with 400 grit
finish hone with 400 grit and plateau
notice how the plateau finishes are alot more shinier then the standard finish.
if you drag your finger nail down the standard finish it feels rough and grabs your nail on the plateau finish its like sliding your nail across a piece of glass you would think the rings wouldnt seat but they do this is what a brush plateau finish should look and feel like!!!!
heres one of my exhaust ports
the center bridge looks crooked as fuk in the pics but is really pretty strait
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
looks good
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO