Lewisclan got me started

britincali · Post by **britincali** » May 20th, 2008, 8:44 am

lewisclan · Post by **lewisclan** » May 20th, 2008, 8:57 am

OUCH

Post by **AlisoBob** » May 20th, 2008, 9:06 am

Settle down .....

We dont need to stink up Bruces intro with a bunch sailor talk.

Bruce takes his Churchin' pretty serious, show some respect.

dannygraves · Post by **dannygraves** » May 20th, 2008, 9:08 am

BOB! what the hell???

Hellbear · Post by **Hellbear** » May 20th, 2008, 10:37 am

Welcome!

xr680r · Post by **xr680r** » May 20th, 2008, 2:39 pm

dannygraves wrote: yup, I've got almost a complete '86 chassis and a pile of other parts sitting in my garage... Would rather help a fellow hoon out than sit on it.
Oh, I have a pipe with a repairable dent on the head pipe and some dings on the side from AZ . I seem to remember talk about a pipe, what chassis is he going to be running?

I will be splitting the case Thursday and start sorting through everyhting. IIf I am going to get both bikes going I will need another engine, I will need a pipe for the 85' and a sub frame for the 95'. Tank and shrouds for the 85'. I have a pile of parts at this time. I am setting up a few XR650R suspensions this week so it won't be today.......

dannygraves · Post by **dannygraves** » May 20th, 2008, 2:45 pm

ya, the only parts for the '85 that I don't have would be engine, plastics, tank, subframe and shock... I have everything else and then some.

dannygraves · Post by **dannygraves** » May 20th, 2008, 2:46 pm

maier sells all the plastics for that year range and clark makes an oversized tank that fits the '85-88 as well.

xr680r · Post by **xr680r** » May 20th, 2008, 8:45 pm

Thanks, I will check in with a new thread when I get that far. Thanks for all the help!

xr680r · Post by **xr680r** » May 20th, 2008, 8:46 pm

Is there a way to look at all the pictures that are above? Bigger?

lewisclan · Post by **lewisclan** » May 20th, 2008, 8:51 pm

http://www.bannedcr500riders.com/board/bannerpics.php

here is the photo valt .

britincali · Post by **britincali** » May 20th, 2008, 8:52 pm

xr680r wrote:Is there a way to look at all the pictures that are above? Bigger?

They are spread all over the site in diff threads and re-sized for the banner, mojo might be able to help tho

xr680r · Post by **xr680r** » May 20th, 2008, 9:03 pm

Thanks, it will take me a few to get the hang of the setup of this forum......

teemtrubble · Post by **teemtrubble** » May 21st, 2008, 12:10 pm

Bruce let me know if you want that pipe.

lewisclan · Post by **lewisclan** » May 28th, 2008, 3:56 pm

Did ya get a chance to split those cases yet?

xr680r · Post by **xr680r** » May 29th, 2008, 12:51 pm

I should be down in the lower desert Friday to give David Gray his forks I just did for him and get my CR500 fly wheel puller from him he barrowed. Saturday I am hoping to get that 85 case split. I forgot all that I was told to me on the 85 frame about papers and stuff, does it have paper work? I am thinking of Zebadiah having the 85 CR500 for Pismo also. He needs a bike. He has been riding Zephaniah's XR400 and Zeph has been riding the CR250R. If I run into to much trouble getting this engine going I was thinking on picking up a running enging so I will have something for Pismo. I have to much going on to get bogged with a problem getting a part I don't have. I got a sub frame for the 95 and won some 91 wheels that I hope to make fit the 95 frame. I don't want to get into the 680 right now and deal with all the running around that will take. I also don't want a giant money pit right now.......just little money pit. They all are money suckers.........
I did get a Scott's damper and bar mount for the 95. May get Fasst Flex bars as well......$350 for bars

I just noticed that this thread asked for photo's:

Jay and I over North of his place:

Ransburge:

Back when Jay was just getting his Nitrous Hill Climber going:

I tried to share these on the CR500Riders group but, got kicked off before it happened.

Jay and I at Pismo:

My bike before Jay hit me at Jawbone:

after that I got rid of the gay gold rims:

ISBB · Post by **ISBB** » May 29th, 2008, 2:37 pm

i have seen ya floating around thumpertalk for a while.. never realized it was you.

teemtrubble · Post by **teemtrubble** » May 29th, 2008, 2:39 pm

I didn't even notice it had Gold rims until you mentioned it...

dannygraves · Post by **dannygraves** » May 29th, 2008, 2:44 pm

ya Mike, you probably didn't even notice there was a bike in that picture!

Hellbear · Post by **Hellbear** » May 29th, 2008, 2:44 pm

teemtrubble wrote:I didn't even notice it had Gold rims until you mentioned it...

Yeah same here.

lewisclan · Post by **lewisclan** » May 29th, 2008, 3:16 pm

Yeah there is paper work on that 85 I just foregot to pick it up.
I pick up good parts all the time and have a set of flexx bars Ill let ya have for what I paid there used . I just got em last week and they where just going to go on one of the hillclimbers. I got $175 into them.

youll also need the hand guards & mounts and anti vibe incerts
that I havent bought yet . those will run you another $175 from the manufacture

Post by **AlisoBob** » May 29th, 2008, 3:17 pm

teemtrubble wrote:I didn't even notice it had Gold rims..

"Gold Rims"..... thats what you call them these days?

Gold Rims it is....

bsmith · Post by **bsmith** » May 29th, 2008, 7:21 pm

PEACE MAN!!!!!!!!!!!!

teemtrubble · Post by **teemtrubble** » May 29th, 2008, 8:00 pm

dannygraves wrote:ya Mike, you probably didn't even notice there was a bike in that picture!

what bike?

"Honey can you get some Gold rims for Father's day?"

xr680r · Post by **xr680r** » May 29th, 2008, 8:03 pm

lewisclan wrote:Yeah there is paper work on that 85 I just foregot to pick it up.
I pick up good parts all the time and have a set of flexx bars Ill let ya have for what I paid there used . I just got em last week and they where just going to go on one of the hillclimbers. I got $175 into them.

youll also need the hand guards & mounts and anti vibe incerts
that I havent bought yet . those will run you another $175 from the manufacture

I am interested! Do you know what sweep they are......10 degree? 12 will work but, I think 10 would be best for my fused wrist. At half price you can't complain to much now can you?

BannedCR500Riders.com

Lewisclan got me started