I want to put a 19" rear wheel on my '01 CR500
I want to put a 19" rear wheel on my '01 CR500
Does anyone know which (if any) year CR250 19" wheels are a direct replacement?
'06 CRF450R, '02 R1, '11 YZ450F
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm
Re: I want to put a 19" rear wheel on my '01 CR500
what year cr 500 the 92-96 cr250 rear wheel will bolt rite up to a 89-01 cr500FZ1426 wrote:Does anyone know which (if any) year CR250 19" wheels are a direct replacement?
-Jake
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
The hubs are the same so the stock 250 spokes probably would work.FZ1426 wrote:Yeah, I really should just buy a spoke set and an excell wheel, re lace and be done with it.
Seems like a such a PITA to find to find the proper (1/2" longer) spoke set. Any recomendations on a good source that knows the proper spoke set?
But I'd just call Wheel Works in GG.
- DitchWitch
- Posts: 30
- Joined: November 23rd, 2009, 11:43 pm
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
i want a gen 1 rear rotor, and i need a 19" that can be scratched bad or whatever, getting a dominator tire + screws, have enough 18s now
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I have access to so many used 19" tires from the cuz its rediculous, if the freight wasnt a killer i'd get selling them on here. He had 20 of them strapped to the harrow to drag the track with
I have a 19" on my af, but am going to run a 18 next summer.
I have a 19" on my af, but am going to run a 18 next summer.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- britincali
- Posts: 8207
- Joined: May 31st, 2007, 7:10 pm
- Location: Barstow, CA
- thestuz
- Posts: 723
- Joined: July 22nd, 2009, 10:04 pm
- Location: Troy, christies beach, south australia.
x3AlisoBob wrote:X297CR500R wrote:Why a 19" wheel? I guess I'm old school. IMO, tires are cheaper, theres more tire selection, and the wheels are stronger. When I do my AF project I plan on getting a 18" wheel to replace the 19"...
i have a 19 and a 18 inch for my 01. personally i prefer the 18. more tyre choices,A SHIT LOAD EASIER TO CHANGE TYRES(i do it myself), more forgiving if you land hard on the rear.
im not sold on the 19 idea, the tyres have roughly the same circumference as 18s,so there is no extra tyre grip, just less tyre wall to absorb the big bumps.
they weigh the same
just pump your 18s uo to 20 psi and it will feel the same as a 19
do it!... cos if you dont, youll spend the rest of your life thinking about it anyway!
01 CR500
98XR600
94 FIREBLADE
ESTABLISHED 1977.
01 CR500
98XR600
94 FIREBLADE
ESTABLISHED 1977.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
the 19" is a bit taller millville to millville, but the 19" also sets up rounder and ends up blowing the center lugs out of it.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd