2006 CRF250/500 conversion
2006 CRF250/500 conversion
Ok now is as good as time as any to start posting my build.
I started this project with nothing so I needed the 500 donor, looked around a bit and found a pristine 1994 CR500 local to me (Ohio), turns out the guy liked guns so all the better for me, I traded a couple of AR-15’s and the 500 was mine.
A few pics
Soon after getting the 500 home into the garage (the next day) it was time to start de-constructing.
I have a lot of fabulous 94 steelie parts to sell, everything except the motor / electronics / carb , ( I will try to get these posted asap).
Then the jug and Head went to Glen for trail port work (the man is truly an artist).
More to follow
RICK
I started this project with nothing so I needed the 500 donor, looked around a bit and found a pristine 1994 CR500 local to me (Ohio), turns out the guy liked guns so all the better for me, I traded a couple of AR-15’s and the 500 was mine.
A few pics
Soon after getting the 500 home into the garage (the next day) it was time to start de-constructing.
I have a lot of fabulous 94 steelie parts to sell, everything except the motor / electronics / carb , ( I will try to get these posted asap).
Then the jug and Head went to Glen for trail port work (the man is truly an artist).
More to follow
RICK
Last edited by agent on February 5th, 2012, 11:14 pm, edited 1 time in total.
Why's it doing that? Shit I'm just a couple hours away and ride every weekend. Don't make me come to your house and drag you out, cuz I'll do itHrcRacing wrote:my '04 is just collecting dust which a $2.5k bike can do just as well.
I'm leaving for a little bit, hopefully be back in a week. Better have the '04 ready...
'03 CR500 powered by...umm...a new motor?
- teemtrubble
- Posts: 2269
- Joined: October 11th, 2007, 2:15 pm
- Location: simi valley, ca
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- eyesky2002
- Posts: 492
- Joined: October 30th, 2007, 8:31 am
- Location: SW Iowa
- Contact:
First of all, it's not crack it's meth........J/K Ok, ok, I'll knock the dust off of it and go ride next Wednesday (less people there). That'll give me a chance to hit the spinner a few more times, not that I need it as slow as I am.eyesky2002 wrote:No shit!!! Robert put down the crack pipe bro, you got the ride you always hoped for; RIDE ITteemtrubble wrote:Mick please take Robert riding before he does something he'll regret.
Update
Been a while, thought I would update the build….No bike yet, haven’t heard from mike in 3 weeks.. Hope everything is ok.., over the last 9 months I have bought a couple of exotic parts that are going to look really nice on the supermoto. Can’t wait to do and post the rest of the build.
Rick, that polished frame is ungodly, has it been powder coated yet? I see you started this thread on jan 21st, (6 months ago) is that when you did your deal with Mike or was it before that?
Last edited by yota on July 13th, 2009, 12:01 pm, edited 1 time in total.
09 TTM CR500AF
08 KTM 200 XC
08 Ducati Hypermotard
03 CR125
95 CR250
83 Husqvarna 125 XC
73 Maico MX250
08 KTM 200 XC
08 Ducati Hypermotard
03 CR125
95 CR250
83 Husqvarna 125 XC
73 Maico MX250
Yota, Paid Mike for the conversion 9 months ago in the beginning of October 2008, soon thereafter ( less than a month ) sent him much , much more $ for new Go fast parts pieces. I have been trying to call/ e-mail him with no results for Three weeks, He finally sent 2 e-mails on the 13th saying he would call right away……. Still no call as I type this , early am on the 15th . As for status on the build…. I assume the picture Mike sent me of the frame leaning up against the desk is mine, the last update he gave me is was that he was prepping the frame for powdercoat on 5-4-09.
- dannygraves
- Posts: 8020
- Joined: June 1st, 2007, 2:03 pm
- Location: Las Vegas, NV
I left Mike a VM a few days ago to call you, after we spoke on the phone.agent wrote:Yota, Paid Mike for the conversion 9 months ago in the beginning of October 2008, soon thereafter ( less than a month ) sent him much , much more $ for new Go fast parts pieces. I have been trying to call/ e-mail him with no results for Three weeks, He finally sent 2 e-mails on the 13th saying he would call right away……. Still no call as I type this , early am on the 15th . As for status on the build…. I assume the picture Mike sent me of the frame leaning up against the desk is mine, the last update he gave me is was that he was prepping the frame for powdercoat on 5-4-09.
09 TTM CR500AF
08 KTM 200 XC
08 Ducati Hypermotard
03 CR125
95 CR250
83 Husqvarna 125 XC
73 Maico MX250
08 KTM 200 XC
08 Ducati Hypermotard
03 CR125
95 CR250
83 Husqvarna 125 XC
73 Maico MX250
it's shown in this thread dated dec 14th 2008.
http://www.bannedcr500riders.com/board/ ... php?t=4838
http://www.bannedcr500riders.com/board/ ... php?t=4838
09 TTM CR500AF
08 KTM 200 XC
08 Ducati Hypermotard
03 CR125
95 CR250
83 Husqvarna 125 XC
73 Maico MX250
08 KTM 200 XC
08 Ducati Hypermotard
03 CR125
95 CR250
83 Husqvarna 125 XC
73 Maico MX250