Millar Auto Machine Company
Millar Auto Machine Company
A+ from one satisfied hoon.
I shipped my dirty old spare head off to Roostius Maximus for a decompression valve.
I have nothing but positive things to say about the service and communication.
Top notch service, and great quality.
I will be doing business with him again.
http://www.millarengines.com/
I shipped my dirty old spare head off to Roostius Maximus for a decompression valve.
I have nothing but positive things to say about the service and communication.
Top notch service, and great quality.
I will be doing business with him again.
http://www.millarengines.com/
Yah, I'm from Saskatchetoon!
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
Man I've been wanting to do this and already talked to Roost about it. Just need the extra $$. Please give a report on how well it works. You gonna cable operate it? You using on your Gen1? I know that a Gen3 has more hand room - the Gen2 will be tight, I think.
The CR500 is an acquired taste. If you don't like it, acquire some taste...
Just installed this head.
100% no bull shit.....
It started from cold, first kick, wearing a pair of flip flops.
BUY ONE OF THESE.
My gramma could start this bike.
100% no bull shit.....
It started from cold, first kick, wearing a pair of flip flops.
BUY ONE OF THESE.
My gramma could start this bike.
Yah, I'm from Saskatchetoon!
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
I forgot to take pictures during the install, but here are a couple crappy post install pics.
There is plenty of room to reach in and push it down with your finger.
There is no need for a lever, since the valve doesn't close until the bike starts.
There is plenty of room to reach in and push it down with your finger.
There is no need for a lever, since the valve doesn't close until the bike starts.
Yah, I'm from Saskatchetoon!
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
MRE 02 250/500 conversion, pulse injector, twirp porting, coolhead, MRE ignition, blah blah blah blah... www.millarengines.com
Re: Millar Auto Machine Company
[quote="Nodge"]A+ from one satisfied hoon.
I shipped my dirty old spare head off to Roostius Maximus for a decompression valve.
I have nothing but positive things to say about the service and communication.
Top notch service, and great quality.
I will be doing business with him again.
X2, Just got mine back. Thanks a 1,000000000000 Adam.
I shipped my dirty old spare head off to Roostius Maximus for a decompression valve.
I have nothing but positive things to say about the service and communication.
Top notch service, and great quality.
I will be doing business with him again.
X2, Just got mine back. Thanks a 1,000000000000 Adam.
91 CR 500, Ca. plated.
09 CRF 450X
XR 650L
2000 CR 250R
2006 CRF 150F
http://www.hammonconstruction.org/
09 CRF 450X
XR 650L
2000 CR 250R
2006 CRF 150F
http://www.hammonconstruction.org/
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Thanks for the feedback guys!
I gotta say that I don't offer any actuator for the head cuz so many different chassis / tank combos are out there and preferences change, but these guys have made a dammn nice job of making the install as ergo as they'd like.
I used a 450 perch and hotstart lever on my '88 bike, which works pretty slick too cuz the pipe blocks access by hand, but in bush it gets a branch grabber, i think braapcr500 used an independant lever.
I like that thumb one Lynn. i'd taken one from the ktm shrapnel but never installed it, maybee on the gen3
I gotta say that I don't offer any actuator for the head cuz so many different chassis / tank combos are out there and preferences change, but these guys have made a dammn nice job of making the install as ergo as they'd like.
I used a 450 perch and hotstart lever on my '88 bike, which works pretty slick too cuz the pipe blocks access by hand, but in bush it gets a branch grabber, i think braapcr500 used an independant lever.
I like that thumb one Lynn. i'd taken one from the ktm shrapnel but never installed it, maybee on the gen3
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Frank, where the heck have you been?
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
decomp setup
what would this run me in us dollars to ship to u maximus and have this mod done.....
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
crf69 did you also message me thru youtube?
240$US + return freight, includes 2 valves, 1 is a spare
shoot me a email and i can call you tommorrow, or give you a toll free to get me at
adam
(@)
millarengines
(dot)
com
240$US + return freight, includes 2 valves, 1 is a spare
shoot me a email and i can call you tommorrow, or give you a toll free to get me at
adam
(@)
millarengines
(dot)
com
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
crf449rsumo from the tube......ryan from ohio......remember dont send it back till nov 15th goin to ride the phillipines and meet family never met!!!Roostius_Maximus wrote:crf69 did you also message me thru youtube?
240$US + return freight, includes 2 valves, 1 is a spare
shoot me a email and i can call you tommorrow, or give you a toll free to get me at
adam
(@)
millarengines
(dot)
com
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
have a good ride Ryan!
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
OK HERE IS MY VERDICT ON THE DECOMP HEAD
it starts easier than both my crf450r's....AND THATS PRETTY FRICKEN EASY!!!!!!!!!......cold hot whatever!!!!!!.......plus it saves my right knee!!!!!!!!.......i cant rave enough about this mod......DO IT!!!!!!!!......get ahold of this guy above^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
They should take the warning labels off of everything and let stupidity sort itself out.
- kelroy_leon
- Posts: 381
- Joined: May 26th, 2009, 9:47 pm
- Location: Sacramento CA
I may be in the market to get 2 heads done. They are going to be in gen 2's, I just have to figure out what engine I will run in mine. As of now I will most likely run a 90' and my bro's bike will have an 87' in it.
OLD: You don't know what the f--k you're doing.
PREFERRED: I think you could use more training.
PREFERRED: I think you could use more training.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
no problem, let me know when you're ready. Call me at work 8663two54445
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
if i hadnt had tool trouble it would have been quicker
been running it?
been running it?
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd