2003 cr500af for sale $5200

[gunner10]

I have been working on it for over 3 years. Just finished it in October of 2013. It has been riden in the dirt 1 time since then. $5200 money talks
Cr500af

Specs

2003 CR250 tig welded frame powder coated satin black
1989 Cr500 close ratio tranny, crank is within spec all new bearings with 1 season on it
1997 cylinder ported and has 90mm piston with one season on it
Rekluse z start pro auto clutch,
new oem honda clutch discs and pressure plates
Boyesen black ignition and clutch covers
Klein 39.5 PWK carb
Pro circuit platinum pipe and 302 silencer
Myers aluminum oversized radiators
Hammerhead break pedal w/red tip
Hammerhead shifter w/red tip
Hammerhead red axle blocks
Vortex sprockets (blk) 15/45 gearing
Fastway evo pegs (black)
New pro taper chain
Satin black excel rims and stock hubs w/ new bearings 19/21
White oversized Buchanan spokes
Maxxis desert it tires w/ hd tubes
Pro action gp suspension 290lb novice rider w/ fork bleeder valve on forks Black brp 20mm offset clamps w/ stabilizer under mount Scott's steering stabilizer
Renthal twin wall bars PC Satin black
ASV levers in black
Gaffler stainless steal brake lines front and rear
Light speed carbon fiber fork guards
Light speed carbon fiber chain guide
Light speed carbon fiber rear disc and caliper guard
E line carbon fiber skid plate
New Acerbic plastics Cyrca stadium front number plate N style red gripper seat cover
2011 throttle jockey team honda factory graphics






If you are local you can see the bike at pro action suspension. Ask for bob he will show you the bike.



Phone 702-290-0026 call or text anytime.
Emil tiny2tons@gmail.com

[gunner10]

Price is negotiable. Shoot me offers.

[dannygraves]

That price is high, dude. I sold a very similar bike, also '03 cr250, very clean, late motor, all rebuilt, only I did the Bailey kit instead of black and red and I sold that bike for $4500 like 4 years ago.

[gunner10]

Ok well I'm open to offers. I saw one on her go for 7800 I believe that was nice but just converted in stock form. And I seen one in parts for 3k I just said screw it and listed it for $9600. No reasonable offer refused. I just want it to go to some one that will enjoy it.

[gunner10]

$4500 you gave that bike away. Which sucks.

[Kuma]

$4500-$4800 is the going rate for a nice used AF, you should be able to get up to $1500 or maybe a little more if someone is looking for exactly what you have, nice bike, powder coat, nice wheels, but if you are looking for top $, you market is limited, just my , if you want me to remove this post from your add, just say the word, send me a PM and I'll remove it.

[cowboyona426]

I think Kuma nailed it, it's a super nice looking bike but getting your investment back out of a build like that is nearly impossible. I'd love to have it myself if I had the cash, but not at your original asking price.

[gunner10]

No I'm not offended at all. I understand I'm going to take a huge loss. It's ok. It's the name of the game. Like I was saying money talks the price is negotiable. And it is a very limited market. If I list it for 6 some one will try and get it for 3k. If I list it for 9 maybe I can get 7500. You know what I am saying? Not trying be un realistic. I have dealt with Craig's list people. I just want an honest offer from someone

[Kuma]

put it on ebay with your bottom $, cycle news, check your local Honda shop, thing looks showroom, they may be able to get your price, of course you wouldn't

If I was looking for a new bike and went into the showroom with the ridiculas amount they are getting for new bikes, I would deffinately jump at the opertunity to pick up a bike like that!
good luck

[gregrobo]

Put it on ebay with world wide shipping that price isn't bad I know people that pay 14k for a service Honda in Australia so if your willing to package for shipping then you will get your $

[gunner10]

I was honestly thinking about doing the eBay routine. I will give it a shot this weekend. I thought about a honda dealer but they put there used stuff out side and it would fade the plastics. The bike is worth what ever some one wants to pay for it. And that's the nature of the beast.

I'm asking 7k for it now.

[dannygraves]

I have shipped a few bikes. if you go international, see if you can get a crate for a new 450 or 250 from ride now or carter, I got one to ship on of mine and it worked great.

[gunner10]

Bikes now $5200! Come get it!

[gunner10]

Sold pending funds

[dingerking]

Back up for sale!

[gunner10]

Sale fell through. Anyone intrested?

[Kuma]

bummer, looks like a nice bike and a fair price, great for someone thinking of building one that doesn't feel they have the skills

[gunner10]

It's a great bike. I love it. But I'm at the point in my life where my knees and back are shot from training. And I'm tired of looking at it. I want it to go to a good home.

[JohnnyAirtime]

Sale fell through. Anyone intrested?

Where's the bike located? City/State?

[cowboyona426]

I'd be all over it if I could scrape up the cash. I don't suppose you're interested in a 4 poke YZ 450?

[ISBB]

Johnny it was/is in vegas.