86 cr500 carb set up

02cr250r · Post by **02cr250r** » April 8th, 2013, 9:09 pm

Hey there i have a 86 cr500 and im clueless when it comes to tuning. Its got a DG pipe and the current jets are: 168 main, 58 pilot, 60 slide, R1370N needle with clip on the fourth position down and i dont know what my mixture screw is set at. Im just looking for a set up that will make the bike perform good. I live in socal and my main riding ares are ocotillo wells, johnsn valley and occasional silverwood. If anyone can help it would greatly be appreciated. Thanks a bunch

Tharrell · Post by **Tharrell** » April 9th, 2013, 4:12 am

Maybe someone from that area with the same setup can give you their numbers but, you should go to the drive section and read Bob's thoughts on jetting.
It's spot on, pun intended.

Redbull500 · Post by **Redbull500** » April 9th, 2013, 4:16 am

Tharrell wrote: you should go to the drive section and read Bob's thoughts on jetting.
It's spot on, pun intended.

x2

02cr250r · Post by **02cr250r** » April 9th, 2013, 8:05 am

10-4. Ill read up on it. Thanks

james1985 · Post by **james1985** » April 9th, 2013, 6:54 pm

http://bannedcr500riders.com/board/view ... ht=jetting

i found this one the best help for me

Tharrell · Post by **Tharrell** » April 10th, 2013, 6:03 am

james1985 wrote:http://bannedcr500riders.com/board/view ... ht=jetting

i found this one the best help for me

Damn

Pretty good for your first post

BannedCR500Riders.com

86 cr500 carb set up

86 cr500 carb set up