Zip-Ty Airscrew
- Rosco-Peeko
- Posts: 823
- Joined: June 1st, 2007, 2:47 pm
Zip-Ty Airscrew
Yep Bobby Special...he turned me onto this many years ago and deserves a revisit....
I love all sorts of cool gadgetry....as long as it serves a purpose and works. Bobber turned me onto this several years back. I put one on the 500 and love it. Its simple, and makes life easy.
http://www.ziptyracing.com/air-screws/
How many times have you taken off in the cool morning...rode till the afternoon when things warm up and throws your jetting slightly rich. **raises hand** How about drastic changes in elevation? **raises hand**
The purpose this serves and it serves it well. You dont need a screw-stick to adjust your airscrew when needed. Reach down and set it with your fingers and get back to riding. What a novel idea!
As it comes int he mail:
It will however utilize your carbs OE airscrew spring!!!! Dont lose it or put this in without it. Unless you want to lose it and have a rather LARGE airleak...lol
I can dig it! Set at 1.25 turns out--same as my stocker was set at. Go ride!
I love all sorts of cool gadgetry....as long as it serves a purpose and works. Bobber turned me onto this several years back. I put one on the 500 and love it. Its simple, and makes life easy.
http://www.ziptyracing.com/air-screws/
How many times have you taken off in the cool morning...rode till the afternoon when things warm up and throws your jetting slightly rich. **raises hand** How about drastic changes in elevation? **raises hand**
The purpose this serves and it serves it well. You dont need a screw-stick to adjust your airscrew when needed. Reach down and set it with your fingers and get back to riding. What a novel idea!
As it comes int he mail:
It will however utilize your carbs OE airscrew spring!!!! Dont lose it or put this in without it. Unless you want to lose it and have a rather LARGE airleak...lol
I can dig it! Set at 1.25 turns out--same as my stocker was set at. Go ride!
Somewhere in Kenya, a village is missing their idiot.......
Re: Zip-Ty Airscrew
This thing is worth its weight in gold.... cant believe it dosent come stock on bikes these days.Rosco-Peeko wrote: How many times have you taken off in the cool morning...rode till the afternoon when things warm up and throws your jetting slightly rich. **raises hand** How about drastic changes in elevation? **raises hand**
The purpose this serves and it serves it well. You dont need a screw-stick to adjust your airscrew when needed. Reach down and set it with your fingers and get back to riding. What a novel idea!
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm
You dam fiddlers. I leave the house at 4800ft and the first climb out takes me to over 8000, drop down the back to about 6300 and rip the singletrack for a couple hours ranging from 5500 to about 7500 the only thing that gets touched is the nozzle on my camelback.
I'm sure it works great and I am really just messing with you guys. My bike blubbers so bad when I push it close to 9000 ft I am sure a twist of the screw would help, but I would have to stop, that doesn't happen much. I am a 100% set it and forget it kind of guy, I am also 100% sure your bikes run better than mine.
I'm sure it works great and I am really just messing with you guys. My bike blubbers so bad when I push it close to 9000 ft I am sure a twist of the screw would help, but I would have to stop, that doesn't happen much. I am a 100% set it and forget it kind of guy, I am also 100% sure your bikes run better than mine.
O.ne B.ig A.ss M.istake A.merica
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
rhino, its pretty easy to set.
stop the bike once its warm and run it in neutral
rev it what sounds to be double idle speed
turn the screw outwards 1/4 turn at a time until the motor stops picking up speed (maintain the same throttle position the entire time)
turn it back in until you notice it drop a few rpm
ride
It'll make a huge difference. If I leave the house at 1pm at a dry 20c and by 2pm its 25c and humid the airscrew makes the difference of abusing the clutch or nor.
stop the bike once its warm and run it in neutral
rev it what sounds to be double idle speed
turn the screw outwards 1/4 turn at a time until the motor stops picking up speed (maintain the same throttle position the entire time)
turn it back in until you notice it drop a few rpm
ride
It'll make a huge difference. If I leave the house at 1pm at a dry 20c and by 2pm its 25c and humid the airscrew makes the difference of abusing the clutch or nor.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
Ditto. 2000 - 6000. I only touch it if I have to because It's pinging or I'm fouling plugs.Rhino89523 wrote:You dam fiddlers. I leave the house at 4800ft and the first climb out takes me to over 8000, drop down the back to about 6300 and rip the singletrack for a couple hours ranging from 5500 to about 7500 the only thing that gets touched is the nozzle on my camelback.
I'm sure it works great and I am really just messing with you guys. My bike blubbers so bad when I push it close to 9000 ft I am sure a twist of the screw would help, but I would have to stop, that doesn't happen much. I am a 100% set it and forget it kind of guy, I am also 100% sure your bikes run better than mine.
...but, I have one of these and do use it.
No longer have a CR500.
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I find the humidity here changes so much it can kill anything. The best rides are 7pm-dark
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
i like to set mine by going thru some tight trail and get the water temp close to boiling over, then pin it up a decent sized hill and lean it out till it surges
adjusting the zip ty is like drinking from a camelbak, no need to stop, just reach down and adjust, ill adjust it while racing just to mess with the guy behind meI am sure a twist of the screw would help, but I would have to stop, that doesn't happen much
the 450 will have less power and will be harder to start, and will be heavier, but to make up for it it will require more maintenance.
4stroke=dead fish
4stroke=dead fish
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm
Humidity....what is that? My face looks like a catchers mitt it gets so dry!!
Maybe I should try one, I am such an anti tuner, I set it out of the book in my garage, roll it into the driveway with all my gear on and ride the tank. If adjustments need to be made I do them in the garage and then go ride another tank. Suspension same way, same thing with every bike unless it will not run.
I tinker when the family goes to bed, I ride whenever I get the chance and never spend the riding time tinkering.
Maybe I should try one, I am such an anti tuner, I set it out of the book in my garage, roll it into the driveway with all my gear on and ride the tank. If adjustments need to be made I do them in the garage and then go ride another tank. Suspension same way, same thing with every bike unless it will not run.
I tinker when the family goes to bed, I ride whenever I get the chance and never spend the riding time tinkering.
O.ne B.ig A.ss M.istake A.merica
Amen. Unless it's required because it's interfering with the riding.Rhino89523 wrote:I ride whenever I get the chance and never spend the riding time tinkering.
No longer have a CR500.
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo