WTB 02-04 cr250 cylinder
- freeride588
- Posts: 418
- Joined: November 20th, 2010, 3:51 pm
- Location: San Diego
WTB 02-04 cr250 cylinder
Im looking for a clean useable cylinder let me know what you guys have. Thanks alot
Kevin
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I need one also
My spare had a sleeve and is cracked.
If there's one left, let me know what it's worth with valves if possible.
My spare had a sleeve and is cracked.
If there's one left, let me know what it's worth with valves if possible.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- freeride588
- Posts: 418
- Joined: November 20th, 2010, 3:51 pm
- Location: San Diego
Roostius_Maximus wrote:I need one also
My spare had a sleeve and is cracked.
If there's one left, let me know what it's worth with valves if possible.
The bridge on the cylinder is cracked on the one I have does that mean I cannot resleeve it. The exhaust ports are not symmetrical and very thin and jacked up looking.
Kevin
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
It can be resleeved ya, but it'd need a weld to be re-plated. I'm in the same boat but mine has a chunk missing from the top side if the already cracked sleeve that was installed.
I'm just getting another motor together from my parts shelf
I'm just getting another motor together from my parts shelf
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd