Tired of the SHIT grip glue?
- NightBiker07
- Posts: 1942
- Joined: April 16th, 2008, 8:59 pm
- Location: USA
Tired of the SHIT grip glue?
Guy that owns the MX campground I visit often swears by using Enamel-based spray paint as the adhesive. I would recommend using a clear so it doesnt show all over, but I tried it and so far it has a solid hold. He said he has tried everything the market has to offer, and this outperforms by far from what he was saying, and so far, I am a believer.
So, if you are tired of crappy grip glues, give the clear enamel-based spraypaint a try. (Rust-Oleum). Allow for overnight drying for best adhesion.
So, if you are tired of crappy grip glues, give the clear enamel-based spraypaint a try. (Rust-Oleum). Allow for overnight drying for best adhesion.
2000 CR250, pipe, filter, Vforce
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
No longer have a CR500.
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
07 Yamaha YZ250, 17 Husqvarna 701 Enduro
Get on with riding or get on with dying.
https://www.youtube.com/mojoscojo
I use black spray paint to glue my grips on, even on my CBR1000.....works great !!! Before I tried it I checked a couple of dirt and street bike forums and found that a lot of riders use it. Ill never use anything else.
99 CR500R
2006 Honda CBR 1000RR Fireblade
My Drinking team has a Racing problem !
2006 Honda CBR 1000RR Fireblade
My Drinking team has a Racing problem !
- asteroid500
- Posts: 1047
- Joined: January 5th, 2009, 1:29 am
- Location: Australia Melbourne
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I buy them from moose, Same ODI grip, better marketing.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- redrocket190
- Posts: 1229
- Joined: September 17th, 2007, 9:07 pm
- Location: San Clemente, CA
- NightBiker07
- Posts: 1942
- Joined: April 16th, 2008, 8:59 pm
- Location: USA
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
I'd done that, wrapped that in chickenwire and duct tape to secure the shrapnel. Later we used 3"hydraulic ram cylinders
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
metered propane and air under pressure, kinda like boost, this one i never went over 20 psi boost cause its plastic and handheld, chamber pressures were already over 300psi
i always wanted to make one out of steel and run real high pressure, but i never got around to it
heres what a 1" long piece of carrot shot out of a 1" barrel can do to a 1" piece of mdf, i never measured but i suspect it was going supersonic
i always wanted to make one out of steel and run real high pressure, but i never got around to it
heres what a 1" long piece of carrot shot out of a 1" barrel can do to a 1" piece of mdf, i never measured but i suspect it was going supersonic
the 450 will have less power and will be harder to start, and will be heavier, but to make up for it it will require more maintenance.
4stroke=dead fish
4stroke=dead fish
- NightBiker07
- Posts: 1942
- Joined: April 16th, 2008, 8:59 pm
- Location: USA
That shit is awesome!!!
never tried propane, never knew how to get it into the chamber.
never tried propane, never knew how to get it into the chamber.
2000 CR250, pipe, filter, Vforce
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
1980 XL80s
1969 Broncco TX-6
Natural selection favors Smart people, so nature selects morons to be slow and dumb for tigers and stuff too eat. But in our modern world there just aren't enough tigers.
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm
http://www.youtube.com/watch?v=5XcKBmdfpWs
Totally messing with you guys on the video, I've built the guns too, not nearly as well.
Totally messing with you guys on the video, I've built the guns too, not nearly as well.
O.ne B.ig A.ss M.istake A.merica