Ohio 2007 crf 250 / 500
Ohio 2007 crf 250 / 500
Ok, thought it was finally time to share:
Ok now is as good as time as any to start posting my build.
I started this project with nothing so I needed the 500 donor, looked around a bit and found a pristine 1994 CR500 local to me (Ohio), turns out the guy liked guns so all the better for me, I traded a couple of AR-15’s and the 500 was mine.
A few pics
Soon after getting the 500 home into the garage (the next day) it was time to start de-constructing.
I have a lot of fabulous 94 steelie parts to sell, everything except the motor / electronics / carb , ( I will try to get these posted asap).
Then the jug and Head went to Glen for trail port work (the man is truly an artist).
More to follow
RICK
Ok now is as good as time as any to start posting my build.
I started this project with nothing so I needed the 500 donor, looked around a bit and found a pristine 1994 CR500 local to me (Ohio), turns out the guy liked guns so all the better for me, I traded a couple of AR-15’s and the 500 was mine.
A few pics
Soon after getting the 500 home into the garage (the next day) it was time to start de-constructing.
I have a lot of fabulous 94 steelie parts to sell, everything except the motor / electronics / carb , ( I will try to get these posted asap).
Then the jug and Head went to Glen for trail port work (the man is truly an artist).
More to follow
RICK
Re: Ohio 2007 crf 250 / 500
agent wrote:
Then the jug and Head went to Glen for trail port work (the man is truly an artist).
But seriously..... Glen has had a long streak of terrible machine work supplied to members of this site. Check it carefully before you assemble it.
Lots of bad bore finishes and holding proper tolerences....
Heres a recent example...
Just sayin'.......
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
Re: Ohio 2007 crf 250 / 500
Who's cylinder was that !!!!AlisoBob wrote:Lots of bad bore finishes and holding proper tolerences....agent wrote:
Then the jug and Head went to Glen for trail port work (the man is truly an artist).
Heres a recent example...
Just sayin'.......
OMG!!!!
Can't believe people are still sending him shit ?????
Well those are the boring bar marks that didn't get honed out because he bores them to finish size then ball hones for good looks and thats what it looks like after it runs for 10 mins!!! I can imagine what the rings look like???
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
-
- Posts: 425
- Joined: July 31st, 2010, 5:22 am
- Location: Tillsonburg On