Diesel Smog?
Diesel Smog?
Hey all you in CA with diesel trucks, have you been through the smog process with your trucks? Did the bill ever go through? Is it anything to worry about? I am looking at a Ford 6.0 and just stumbled uppon some smog stuff and wanted some trustworthy advice... thanks
Brian
Brian
It's just Bull Shit to get more $ for government spending.
They just hooked mine up to an OBD2 cable and open the hod and stand there like they know what they are looking for. basically if you show any codes you fail, no codes, you pass.
I have 4" exhaust from turbo to tail and aftermarket air filter. I have a tunner that I am able to take it back to stock prior to the test. I didn't have a problem except forking out the doe.
They just hooked mine up to an OBD2 cable and open the hod and stand there like they know what they are looking for. basically if you show any codes you fail, no codes, you pass.
I have 4" exhaust from turbo to tail and aftermarket air filter. I have a tunner that I am able to take it back to stock prior to the test. I didn't have a problem except forking out the doe.
Low miles! Be sure to do your homework on it. 05/06 is the best 6.0 - but it's still a 6.0 - they got most of the bugs ironed out by then, but there are some necessary fixes that should be implemented to make it reliable. ford-trucks.com is a pretty good forum to poke around in.bgraley wrote:It's an 05 F350 dually. 43000 miles. I think it is all stock. no programers. i want to add an exhaust though.
The CR500 is an acquired taste. If you don't like it, acquire some taste...
-
- Posts: 391
- Joined: March 13th, 2008, 9:50 pm
- Location: FRISCO
My buddy was telling me about the fords I forget what year he said but to do any major engine work you have to pull the hole cab off the frame??????????????
What da fuk!!!!!!
They can keep dem fords I'll stick with chev!!!!!!!
What da fuk!!!!!!
They can keep dem fords I'll stick with chev!!!!!!!
00'cr500 trailclimber
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
93'cr500 beater
92'cr500 hillclimber
08,KTM SR500r hillclimber (conv)
89'cr 500 bent frame
04'crf230(wifeys)
02' cr125(sons)
02,pro jr 50 open exh. hill climber(sons)
02'sx65(sons)
03'xr50(sons)
Thanks Jay! I'll try and get some pics up tonight when i get home... maybe not, we are taking out with the camper for a try out trip tomorrow and saturday. I have a lot of work to get done before then. the cr is almost done getting the rebuild and the camper needs a bit more work.
The truck has a utility bed that i am wanting to switch with a standard bed. if anybody knows of a place where i can look to take care of that, let me know. also if you are interested in a bed for a 350 dually let me know. it is nice, little bit of rust though.
The truck has a utility bed that i am wanting to switch with a standard bed. if anybody knows of a place where i can look to take care of that, let me know. also if you are interested in a bed for a 350 dually let me know. it is nice, little bit of rust though.
Fuck out here in arizona they throw your Diesel on the rollers put it in gear and pin that fucker till the rev limiter kicks in and hold it there first time i saw it i was like WTF are you doing to my truck you asshole! held it at rev limit for 1 min while the sniffer was testing "opacity"
Bunch of bullshit out here. Maricopa County sucks. You even have to smog your croth rockets here..
Bunch of bullshit out here. Maricopa County sucks. You even have to smog your croth rockets here..
- Widow Maker
- Posts: 89
- Joined: November 15th, 2010, 5:46 pm
- 2strokeforever
- Posts: 1524
- Joined: November 13th, 2009, 1:04 pm
- Location: Vernon B.C Canada
if someone did that to my $900 truck theyd be lucky to only be missing teeth....Fuck out here in arizona they throw your Diesel on the rollers put it in gear and pin that fucker till the rev limiter kicks in and hold it there
maybe you guys can rig the throttle to only open 1/4 ways
the 450 will have less power and will be harder to start, and will be heavier, but to make up for it it will require more maintenance.
4stroke=dead fish
4stroke=dead fish
- arleybeer40
- Posts: 632
- Joined: October 31st, 2007, 11:38 pm
- Location: rancho cucamonga