MRE Millar Race engines and Auto machining
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
Re: MRE Millar Race engines and Auto machining
dubious01 wrote:
looks like one i had many moons ago. ran real good
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
seems i remember a certain person (you) that didnt know how to put a simple piece of solder on the piston. ah yes here it is http://bannedcr500riders.com/board/view ... 02&start=0
like a little lost kid who cant find his way home. been riding all your life but gotta have someone hold your hand putting on solder. what a joker
like a little lost kid who cant find his way home. been riding all your life but gotta have someone hold your hand putting on solder. what a joker
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- caseyracing222
- Posts: 569
- Joined: January 28th, 2009, 4:20 pm
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
Clyde, I subscribed to your YouTube channel
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
in regards to the honda, i see some design issues with the reed cage, stoppers, boost ports. im sure you seen them as well since your cutting back the stoppers but i think it might only be partial fix to the problem. ive known about these honda issues for a while but didnt realize how bad they seemed untill i got examining the ktm design. comparing the 2 designs really sheds some light on a few things. based on what the ktm engineers have done i think i have some ideas that may prove to work well on the honda. honestly i see no reason why they wouldnt work for the better.
besides cutting the stoppers have you tried opening them more towards the intake roof/floor ?
less of a concearn for me is reed cage depth but have you tried pulling the stocker back 3/8" ?
besides cutting the stoppers have you tried opening them more towards the intake roof/floor ?
less of a concearn for me is reed cage depth but have you tried pulling the stocker back 3/8" ?
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
It is also, and that is a priority.100hp honda wrote:in regards to the honda, i see some design issues with the reed cage, stoppers, boost ports. im sure you seen them as well since your cutting back the stoppers but i think it might only be partial fix to the problem. ive known about these honda issues for a while but didnt realize how bad they seemed untill i got examining the ktm design. comparing the 2 designs really sheds some light on a few things. based on what the ktm engineers have done i think i have some ideas that may prove to work well on the honda. honestly i see no reason why they wouldnt work for the better.
You're a dumbass
besides cutting the stoppers have you tried opening them more towards the intake roof/floor ?
less of a concearn for me is reed cage depth but have you tried pulling the stocker back 3/8" ?
Why does every post you make have me questioning you're intelligence.
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
i think you misunderstood what i said for a poke at your engines. had nothing to do with you. was my observation of hondas design in general. thought the whole point behind this site was to exchange info with other folks in attempt to make a better bike by correcting flaws manufacturers over looked ?? had some pics you might be interested in seeing but since you think your twirp is the final word in 2stroke performance ill just keep my stupid ideas to my self.
me and you both should be taking notes every chance we get and try to learn everything we can. this is your graph drawn in with a mccoy cr500 graph. we would swiftly have our asses handed to us if we ran into this beast in real life. the more i think i know, the more i realize i probly dont know very much.
me and you both should be taking notes every chance we get and try to learn everything we can. this is your graph drawn in with a mccoy cr500 graph. we would swiftly have our asses handed to us if we ran into this beast in real life. the more i think i know, the more i realize i probly dont know very much.
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
You send me the $ and i'll make one match that dyno.
I didnt say that this package of work im selling is the max, the limit of power or anything like that.
I said its the best.
I dont have cylinders ready that i'm going to say are the thing you need, I do have cylinders waiting to get the porting i'll reccomend for the individuals needs.
If someone wants the 80+hp topend only motors, i'll build them. Truth is most guys hardly ever see that kind of rpm or stay up in the power.
I'll make it have torque, accelerate faster, and the motor will live longer.
The honda reed could have been bigger, and like the ktoom style, but it'd kill the low end signal to the carb, thats why its small
I didnt say that this package of work im selling is the max, the limit of power or anything like that.
I said its the best.
I dont have cylinders ready that i'm going to say are the thing you need, I do have cylinders waiting to get the porting i'll reccomend for the individuals needs.
If someone wants the 80+hp topend only motors, i'll build them. Truth is most guys hardly ever see that kind of rpm or stay up in the power.
I'll make it have torque, accelerate faster, and the motor will live longer.
The honda reed could have been bigger, and like the ktoom style, but it'd kill the low end signal to the carb, thats why its small
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
-
- Posts: 4394
- Joined: July 4th, 2007, 6:57 pm
- Rhino89523
- Posts: 1230
- Joined: November 18th, 2010, 1:45 pm
The stuff posted is kind of hard to see the curve but if I am reading it right it looks like that high HP motor is a dog until it hits like 6g....for people who ride their bikes anywhere other than a sand dune, that is going to suck. I don't want the power characteristics of a blubbering xr 80 until 6g. Then it makes the most power at 8g. So I need to wind the piss out of my 500 all the time....I think that's where the longevity that Roosty is talking about comes in, I would be throwing top ends in there like a kid with a 125. I have ridden some of Roosty's work and it was very rideable and ran great for the kind of stuff I do and I belive it was only half TWIRP it didn't have the bottom end porting or something (I could be wrong on this part it was Bob's bike)
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
It can happen, just start throwing $ my way and i'll tell you when to stop. I'd rather build a torque motor that'll kick its ass
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
- Roostius_Maximus
- Site Admin
- Posts: 4641
- Joined: November 16th, 2007, 3:24 pm
- Location: Mt Nebo, Manitoba, Canada
- Contact:
He didnt have the cases apart so i couldnt do the work there. It can gain alot more if that ever happens.Rhino89523 wrote:it was very rideable and ran great for the kind of stuff I do and I belive it was only half TWIRP it didn't have the bottom end porting or something (I could be wrong on this part it was Bob's bike)
http://www.youtube.com/user/500bigbore
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
My CR500 Tech Reference... http://sdrv.ms/1a0CIiz
MRE Components... http://sdrv.ms/1bs2zhd
100hp honda wrote:you cant make anything match that dyno or you would of already done it a long time ago. plenty of people would pay good money for that much power. all i see is excuses
Dirt clod you are such a
Nobody here even cares about what you post.
NAHA PRO HILLCLIMBER #216
LIVIN THE DREAM!!!
NOTHING BUT GREEN LABEL BLENDZALL!!!
http://sponsorhouse.loopd.com/Members/P ... /Home.aspx
http://www.pro-hillclimbers.org/
LIVIN THE DREAM!!!
NOTHING BUT GREEN LABEL BLENDZALL!!!
http://sponsorhouse.loopd.com/Members/P ... /Home.aspx
http://www.pro-hillclimbers.org/