Parting out 2 500's and a 2000 cr 250

Come on in, No registration needed.... Thinkin' about stepping up to the ultimate dirtbike? Ask any questions you need answered.

ALSO: Post anything your looking for, or that is taking up space and you want to get ride of.. ALL TRANSACTIONS ARE BETWEEN THE BUYER / SELLER!
Post Reply
User avatar
Uzi
Posts: 218
Joined: June 21st, 2007, 9:10 pm
Location: Lincoln NE

Parting out 2 500's and a 2000 cr 250

Post by Uzi »

Cleaning out the garage before moving and need to get rid of some bikes.

2000 Cr 250 complete bike but it is taken apart for a rebuild. I will sell as a whole or in parts.

Some of the things it has:
Fat bars and hand Guards
Full FMF exhaust
Fresh cylinder replated by U.S chrome V force 3 reeds 0hrs
New piston and rings 0 hrs
Crank and bottom end with all new bearings and seals less than 25 hrs on it.
Skid plate and radiator braces
New back tire still has sticker
Spare new OEM crank



1990 Cr 500 parts bike

Polished forks and swingarm
Good radiators and plastic
Excel wheels and heavy spokes
85 engine with eric gorr port job needs carb reeds and a side cover.


1985 Cr 500

Race tech cartridge emulators in the forks
Gold valve in the rear shock both valved for 185 lb intermediate motocrosser
Wide IMS pegs
Fat bars and hand guards
Skid plate
Can be set up for hill climb with extentions
Recent rebuild less than 30hrs on the engine has an hour meter installed call me I can't remeber the exact time.
It does need new plastic all around and a air filter.


A couple sets of extensions and a permanently modded swingarm

Polished stock swing arm 1990 $50 needs bearings

Polished forks 1990 no leaks would at least need an oil change $50

OK seat, good tank and plastics from the 1990 make an offer.

Rims off the 1990 excel brand straight good spokes good hubs

rear $125

Front $75

I've also got a 85 motor runs good no carb or reeds, no kicker, I think I've got an ignition somewhere. Eric Gorr port job don't know what specifically but it revs more than a stock one and is smoother. Its on the last bore but has been gone through new bearings in the case halfs and rebuilt rod less than 25 hrs total run time since rebuild. I've got the larger rear bushings from honda if you want to AF it.

I would like to get $650

I've got a lot more 500 stuff laying around mostly older stuff, If your looking for something specific shoot me a PM.

PM or email me for pictures of anything listed here and feel free to make an offer the worst I'll say is no. I prefer paypal but I'll work with you if you want something different.
Last edited by Uzi on November 12th, 2010, 12:53 pm, edited 2 times in total.
1982 XR200
1985 CR500 86' Motor
1990 CR500 85' Motor
2000 CR250
User avatar
Uzi
Posts: 218
Joined: June 21st, 2007, 9:10 pm
Location: Lincoln NE

Pictures

Post by Uzi »

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
1982 XR200
1985 CR500 86' Motor
1990 CR500 85' Motor
2000 CR250
User avatar
Uzi
Posts: 218
Joined: June 21st, 2007, 9:10 pm
Location: Lincoln NE

Post by Uzi »

Bump back to the top I'm parting out more stuff
1982 XR200
1985 CR500 86' Motor
1990 CR500 85' Motor
2000 CR250
User avatar
Bomberpilot
Posts: 45
Joined: October 29th, 2010, 6:04 am

Post by Bomberpilot »

do you still have/sell the complete cr250 ignition system?
whats the prize?
Post Reply