Aussies and big bores go together like hot pants and Kylie Minogue!
Probably because it takes so long to get any where, so its a matter of getting there asap!
I'm in the vmx scene here so I have a lot of old school big bores. And seeing as I only ride old school two strokes, I thought a 4 broke was out of the question for a modern. So I have a '99 frame with a 2001 motor in it. I made the later model plastics fit. It also has Ohlins on both ends as well as every trinket I could find. Still have to fit the over size front disc.
2strokes4ever wrote:I was at Conondale last year for VMX it was a good two day event
Just to watch or did you ride?
I was there as well and will be again this year.
Conondale is one of the best tracks in Oz imo . I got to take the af around earlier this year as well.
Thanks for the welcoming guys.
Two strokes truck, four strokes suck!
Nah, i was there drinking beer and filming everything
i fucked the date up on one of the videos, but like i said, i was drinking beer, i hope you like these clips, you might even see yourself, im looking for 090
Yep, ya got me. That was the Aussie championships. I am in the pre 70 video leading on the big 360 CZ.
You should go to classic dirt. No racing, just three days of riding and drinking beer, or in my case Bourbon!
where did you find the white side panels for the 83? i NEED some badly, i got the brittle dc ones
1983 cr480 bored to 494cc with '87 front end revalved by white brothers, stock pipe with dg silencer, 1 1/8 tag bars
1987 cr250 with '89 front end, v force 3 cage, ohlins rear shock, pro circuit works pipe with 304 silencer, 1 1/8 tag bars
They are nos DG side covers. They are a bit brittle too. Best give vmx racing a go. I have had a set of white plastics made for another bike. I'm sure they would do a set in white for you. http://www.vmxracing.com/vmx-main.htm
1983 cr480 bored to 494cc with '87 front end revalved by white brothers, stock pipe with dg silencer, 1 1/8 tag bars
1987 cr250 with '89 front end, v force 3 cage, ohlins rear shock, pro circuit works pipe with 304 silencer, 1 1/8 tag bars
