BannedCR500Riders.com

Iv used the Vholder HD version mounted on the side of my helmet and the image quality is very nice. One down side of the Vholder is the downloading and editing programs are junk. But to me if you ride tight trails its way less likely to get knocked of from a tree than the huge Gopro's.

Those shinny rollbars and bumpers are chrome plated steel.

I was thinking of doing somthing similar to that. But I think I am going to run it as is if it cracks you guys can say "I told you so" yes the pipe and springs will fit, for the top springs I may have to use a different type of spring but it will fit without hitting. Now it's time to start...

Now I need to decide if I should run it as is or reinforce the Y up top.....What do you guys think????

Reinforced the front mounts with 1/8 plate on the inside of the frame rails from the Y to a couple inches below the mounts

Clearanced the frame for the front mounts https://bannedcr500riders.com/images/auto/4a38eb97415b6487ab8cef8418a4b06f.jpg Made the front mounts out of some 1" round stock turned down to about 7/8". https://bannedcr500riders.com/images/auto/6e741055c51c1c0ba87182fed3a9d3de.jpg Mounts welded ...

Made the Headstay today.

Pictures of the finished Y https://bannedcr500riders.com/images/auto/53d6164ac0b512df96269f96afbfe773.jpg https://bannedcr500riders.com/images/auto/a2f0fa61f425254a01e5fe6ddcb84e9f.jpg Hopefully she holds together. One good thing is the bike will be used for trail ridding and wont see any jumping mo...

After all the work it took to clearance the Y and make a piece to fit I would deffinatly just move the Y up on my next build (after the one I made cracks :( ) . One thing I did alittle diffrently than others is I cut very little away from the front of the Y and more from the rear which leaves alot m...

Thanks Hoofarted. I see you used the IMS tank for your build and you didnt have to modify anything for fitment, thats good to know! I pulled out the syncrowave 200 after sittting for two years and tried to practice some tig welding but the POS wouldnt give me more than 20-30amps output in the AC mod...

Has anyone used a spool gun to weld there frames?? I have a millermatic 210 with a spool gun attachment but never used it very much, I mainly use the welder for mig welding steel. I also have a miller syncrowave 200 tig welder that I have only used a handfull of times on stainless steel and two or t...

engine front mount

Removed the front motor mounts. I may modify and reuse them. https://bannedcr500riders.com/images/auto/dfe77979e3fc2b4f897cd8293acfef2f.jpg https://bannedcr500riders.com/images/auto/18f4f1cea592dcf7d518f126e681e9c9.jpg Clearanced the Y https://bannedcr500riders.com/images/auto/0312a1361d9ac296f55371...

No island of Kauai. It would be fun to make it Street legal. I havent thought about it...

selling it with the carb, minus the ignition system. Clutch is due replacement.

the 500 engine I got was prity thrashed but it was complete, someone did a porting job on it that looks prity shady to me and the cylinder head water jackets are very rotten. The bottom half looked like it has never been split and the bearings long overdue for replacement. https://bannedcr500riders....

I have a 2001 cr250 and plan on putting a 93cr500 engine in it. So far I have removed the front motor mounts and clearanced the Y for the pipe. I will post some pics when I figure out how...

Iv got an 01 cr250 that I will be putting a 93 cr500 engine in. I will post the build on this forum. Iv also decided to have roosty do my engine work, talked to him on phone and seems like a solid dude. Please feel free to give me your constructive critisism of my work :) I have never done a build l...