BannedCR500Riders.com

:( Ok I Took the Big Girl to the mountains today, adjusted the mixture screw out 1/2 turn,had to back off the idle heaps,very snappy cracking the throttle. As soon as its gets on the needle its flatter than a pair of brail tits. when it hits the main jet It flys! I'm assuming the needle is rich? as ...

MAAATE!! I took her up the road for a strap this morning. F_M_Dead!
Its Never felt so good,crisp,crackly and as it comes onto the start of the powerband the wheel starts to rise in every gear. I could never get the PJ to perform like the PWK.Best bang for buck I'v spent,Gets my vote.

Ok I slotted in the PWK with DGN 3rd,172 & 45 +1.5 turns. Second kick fired up,no idle, wound in screw nearly all the way...idle's. Played with the mixture screw and its happy at 1 turn out,couldn't test ride it because its pissing rain but it sounds Horny , real crackly Bink!! Bink!!. I'm just ...

I bought a brand new in the box PWK (the ebay one) off a mate.It came fitted with a CGJ,172m & 52p, I am going to start with a DGN,172 & 48p.Do you think this is a better starting point riding at 1,110m/3,600ft? With the stock carb on my 2001 the DGN was too lean,the 1368/cgj was a little fa...

gregrobo wrote:its mine bargain

Back off buddy its MINE!

Found this beauty,hope i dont get out bid!.

http://cgi.ebay.com/ebaymotors/CLUTCH-L ... 1e61e0a5d1

O>E>M why would you bother buying cheap crap ones?

I bought a used car from Japan today...it only had 15 nautical miles on it..

Ah well it was worth a shot. cheers mate

One for the Vforce fans..Will a VF2 for an '03 CR250 work/fit on an '01 CR5OO?
cheers

Hi mate..I'v had a tooth ache for a while now..How much do you charge for fillings and maybe a polish too?

What about a twin choke side draft webber? Fullly adjustable..

I too had a lot of play in the basket and the bush measured up in spec so i replaced the bearing and this alone took out 80% of the play.I replaced the kick starter idler gear bush at the same time and this removed nearly all the play from it,the bonus is they are both cheap.

I got an old White bros one on ebay(brand new in bag) heaps better protection than my mates B&B one.

Yeah mate,have to agree! Carbon kevlnar is the go. "high speed it grabs heaps of air and tries to pull ur head of ur neck ! " Maybe cos its so light? but just tilt your head down a bit. Very nice to wear and very light.At the end of the day you neck is not sore like with heavy fiberglass h...

The only thing you can't check by looking in the exhaust port is if the bridge is pinching/scoring the piston.Every 500 that I'v pulled the cylinder off that has been worked on by someone else, has not had the bridge relieved. Lots of bike shops don't even know that 500 cylinders need this mod. Pull...

Looking good mate!
Love the '01 look and the black rims.

Getting the shits now...I got the pliers on the end of the rod and pulled like a schoolboy,she's not move'n!
Must be some monster burr? What the f#@k could be holding it?
Does it matter if i leave it as is?

I'm taking apart the clutch on my '01.
I'v removed the clutch hub and rod lever but the rod only moves about 10mm and sticks.Why? Is there anything holding it?

Santa abandons porsche to ride in style with an Elf on MR50.

Hi all, great site with endless info. My delema is..What size PWK do i get, '01 500? A 38AS or 39.5 ? The more i read the harder it is! Every PWK gets great reports! I don't crave more power in any particular area(won't complain about more either).I ride single track to open fire trails,anywhere rea...

Haa! No worries! Just having a go.
(now i have to find another avatar)
This one should be good?

Thanks,Looks like not everyone likes it...I'd like to look at tits and CR's at work too BUT i have to work.

Hi,sydney mate,where about in QLD are you?

Just a quick hi,good site and a bit more real world/liberal than others.