BannedCR500Riders.com

Yes that is a factory weld, however I believe the shit headstay design does not brace enough and causes additional stress here.. Youn are correct. There are many othes on here with the same damage and tghat shit headstay design. Unfortunatley many home builds without any research end up copying his...

Hey thats awesome, top and bottom -20mm for $80 between my post and Adams!

Thanks for the information.
I knew somebody here would know.

There is a a bottom, just a bottom, 20mm offset on ebay right now.
Top is missing, and no post.
Thought I'd mention it.
$35 I think....

Check out my photos on the topic Gen III500 Build, my welds arent as bad as the ones shown. Anybody wants some more upclose photos id be pleased to post them. Nothing was really to bad but wouldnt recommend it. I bought mine cause I didnt have much time for the build and thought I could just "...

Does the front tire clear your pipe with 20mm offset triples? gen 3 250 2stroke chasis? gen 4 CRF250 chasis? Post up for the others chasis too if you wish. The 250 2 stroke chasis utilizes the stock bottom motor mounts, so those should have pretty standard engine angles, However the 4 stroke chasis ...

for the CRF250, and CR250 chasis, just buy CR125 swingarm rebuild kit, and you will have the right bushings in it!

I have a 2002 CR25 and 2002 CRF450 in the garage, stripped.
The 450 is a bigger frame, the tank is about 2 inches longer.

CR250 2 stroke frame is easiest to convert

with all due respect for Eric Gore, he also liked less compression than stock motor,
That was the part I really didn't like about his motor

That pipe looks allot like a stocker.... skinny rev pipe

I am thinking the 450 Junk frame I have is an MPS frame.
same headstay, and the same overheated welds.
blobulous maximus

Look at the stock lower frame pad and how bad it was burned down from the new mount on the left rail....

shit indeed

8"
Thats all?

Head must be mint, not milled, not machined, no craters in the chamber from debris.

LMK what you have. Pictures of the combustion chamber /dome would be better.

Arm must be in decent shape, no deep gouges, or major damage.

Thanks,
Lyle

I have swapped brake components back and forth, from 05 and older and never noticed much change in their operation. You can do it without fear. I have found old stock brake lines do get soft, and lose brake feel and power, along with bi-annual fluid changes and sintered HH+ pads, the power has come ...

here are some pics of a big end rod failure. I bought this bottom end like this. I had never seen one like it before, I would imagine the rod brg was so worn out the rod journal ovaled and broke? or else it sucked in water and hydrolocked, cracking the rod, and it came apart the next time it saw rev...

well, where is your bike?

Looks great.
I like the ti flange head bolts.
Where did you get them?

and the clutch and ignition covers rock...$$

I had a black LX 5.0 5 spd car, autorotor twin screw supercharger, factory headers, with 3" header back dual 50 series flowmaster exhaust, eibach springs, hotchkiis subframe connectors and tower braces, lowered 3". 275/40 rubber on 17" enkei's. I beat the hell out of that car, and it ...

when your done with Adam, I have a couple too. 1 brand new, the other used never molested.

x491


:

I'm still really intruiged by the CPI or RPM Liger kit.
that would be kick ass!
I noticed their cone pipe welding is pretty ugly though...

Gonna see what develops, the problem will likely be the tire...
what tire is gonna hold that much power, maybe? an MF44? haha

I'm sure mine will thaw on the way to florida

looks great, nice new cradles. Are you using 1" x1" new tubes? I have a 450 frame that needs new cradles and motor mounts, if your interested in selling me some. its not economic for me to ship a frame from Canada both ways, but I have a good welder, and I am confident with my fab / cuttin...

Feedback is a joke,

If you give anything less than excellent feedback its a big ordeal and a pile of questions,

and if you threated to give bad feedback like I did, thinking he would fix the problem, Ebay revoked my feedback for the asshole, because Im extorting him they say...

hopefully he is an honest guy who just had hard times, and is coming clean....
it happens sometimes

2strokeforever wrote:taser prolly hurts as much and has a very unpleasant sensation, and its clean

can't buy them with a tazer bro.
hard to dig a hole with that I think!