BannedCR500Riders.com

oh, duh, the place I'm thinking of is rib trader.

I think so, I've eated like everywhere there, just can't remember them all. Its a brit type situation, my high school years where spent consuming as much THC and alcohol as possible while driving my '62 lincoln...those were the days... is that the place on the south side of town in the ralphs (used ...

Its was 81 in Aliso today.... no complaints.... Yeah, my boss (well, not really, more like the guy who hooks me up with clients) lives in san diego and drives through my home town of san clemente about twice a week and when he does he stops by the pier and calls me with the sound of waves and seaga...

like I said, if you don't have any way to acurately measure, look at the numbers on the piston, as long as it isn't 91mm or 2.00mm over (.080") then you can just go one more over. no one will be able to tell you the bore size by looking in the picture. it looks thin, but you might just me at 1....

ou812 wrote:85-86 barrels are not avalible, get a sleave and press in

thats what I thought

yeah, it was really f@#$ing hot here yesterday and the charge leaked out of my trucks a/c, what a PITA!

the easiest thing will be to look at the numbers on the piston. if it says 1.00, then buy a 1.5 piston and send them together to the machine shop. if the piston says 2.00 (last over bore) see if the new cylinders are available ('85 and '86 are the same, the '87 and '88 saw changed to timing, but wil...

I got a killer deal on ebay on a NEW ims 3.7 gal desert tank for my gen-1 and it just arrived, but I'm at work and can't test fit it. Has anyone run it? How was the fit?
Thanks
Danny

no you know what, thats c1, but M5 is 23481-ml3-000 and SH has it listed for $52.63
thats #14 in the parts fiche

I can't remember which gear, but I'm assuming its the largest main shaft gear. if you go here they show an updated p/n, maybe they made some changes to it in '87
http://www.mrcycles.com/fiche_select.as ... onda#SDOWN

I'm looking @ a parts fiche and it says the mainshaft fifth gear is N/A,is this true? I wouldn't be surprised, most of the parts that are pre '87 are unavailable, or it will say that it is, but they just send you the newer vesion which doesn't fit. I've heard of people buying the old clutch basket ...

'87 is everyones fav year. great power like the older ones, but it uses the new rod and the newer ignition and still has a wide ratio trans ('88 went close ratio). But it still uses the old clutch and the old countershaft so the c/s sprockets are still a little harder to find. What year is your bike...

of coarse if you have the green I would recommend doing what I did. Not only is the clutch pull a lot lighter, but the operation is smoother. Most importantly the parts are available. I couldn't find the center and I wanted to replace my corroded waterpump anyway. I bought all the parts to do the c...

of coarse if you have the green I would recommend doing what I did. Not only is the clutch pull a lot lighter, but the operation is smoother. Most importantly the parts are available. I couldn't find the center and I wanted to replace my corroded waterpump anyway. I bought all the parts to do the co...

if you can't find clutch parts, I have a bunch of them. I converted mine to a 90+ clitch and t/o bearing and complete side cover.
The only part I don't have is the center hub.

kkvslayer wrote:also I forgot to mention there was no ball bearing in the clutch assembly

are you sure it isn't stuck in the lifter? mine was, it built up some sludge that kept it in there.

sounds like good times. My boy is still too small to ride around by himself, but he likes to ride on my lap on the atc 90 and he even takes over the throttle and steering while laying on the tank. He will be a true hoon soon enough!

sorry dude, that remind me of my basket case when I got it, only worse. Yes, thats a wiseco. Some builders don't drill holes and don't releive the bridge, they are real bright! :D Well, it looks like it is going to force you to do a full rebuild, so dig in! Heres my plan,new gaskets,seals & bea...

Here is a little write up on releiving the exhaust bridge. itf for an aircooled 350, so the dimensions are a little off, but gives you an idea.
http://www.aftershockmotorsports.com/350rebuild/

look at the color of the top of the piston too, I hope thats just optics on the camera!

yeah, that head looks way dinged up to me. Thats just an excuse to send it out and have it reshaped (and send the cylinder for porting work too) 8-)

sorry dude, that remind me of my basket case when I got it, only worse.
Yes, thats a wiseco. Some builders don't drill holes and don't releive the bridge, they are real bright!
Well, it looks like it is going to force you to do a full rebuild, so dig in!

AlisoBob wrote:

dannygraves wrote: heres he is helping his old man get the truck clean for mommy on mothers day

Your kid lives with Fred Durst?

LOL, you don't like my hat? :'-(
with our uv rating of 11 out of 10 in vegas here, I wear it so my scalp doesn't burn. The wife says it makes me look like a "bro"

hoofarted wrote:
And regarding Del Taco Dan's statement

speaking of del taco... I'm f-ing hungry after reading Rob's food post! The Del sound pretty good right now!

heres my hoon in the making
these are the only pics I have on my work PC
heres the boy and his dogs (pic is a couple months old)


heres he is helping his old man get the truck clean for mommy on mothers day