BannedCR500Riders.com

it is the flat angle part on the dome part of the head before the rounded dome, the distance between that and the piston is what there talking about if that makes sense

would boring my 38pj out have any affect on the power curve

I have a mild ported (basic clean up exhaust raised up about 1 mm) and a re chambered head 87 cr500 motor in a 2001 af frame I'm looking to upgrade my rad valve and 38 pj with either stock reeds or v force.... I was gonna put a bored out 39mm pwk on it (41.5) but now I see pulse injection and smart ...

I have considered one the only issue I think I would find as a down fall is when I hill climb with the bike?? when I would get stuck it would be like the bike being in neutral correct? the issue there is with out the bike in gear it is much harder to control the bike on the hill turning around or wa...

heyahh wrote:Don't suppose you remember the PN for the hose? If you just did the build, maybe you still have the receipt??

I will look for it.

Looks nice I just did a 2001 frame and a 87 motor I ran into the same intake issue and did the same thing lol.. I am running a single hose for the coolant line I found at a auto parts store.

Nice bike.. small world I was looking at this on Craigslist earlier lol

https://bannedcr500riders.com/images/auto/ad9a1df3f3bf9a0f74f399d4372c126b.jpg Sorry I dont really have any better pics yet.. mine is the red and black one in the front.. I had got new plastics but they came in the wrong year :( Ill get some better pics up soon But so far I absolutely love it .. se...

anyone ride around eastern pa? I ride up In the coal region if anyone Is Interested?[/b]

Sucks about that idiot... I'm with you im not the best for sure but I can admit that and I dont quit.... I have always wanted to try That type of race thou I know I could never win it would be cool to try.. Hope you do well solo next year How long did it take you to do your 200 mile part of the race.

I had to open my 87 case bushings for the 95 roller I put it in there.. I put mine in a lathe to bore id they are pretty hard. It would be easy enough to just make new ones thou if you have access to a lathe.

OUTKAST INC. wrote:I have an extra head that is cut to use o rings and no gasket , stock compression 1995 , works great and runs cooler than stock ...

I like that idea sounds like a better solution than the gasket

Well when I got the bike in pcs the kid took the swinger and put it on his 2007 cr125 cause it has a broke chain tensioner bolt so I have the 2007 cr125 one and it is slightly too wide to fit I did work it over a little and got it to fit but had to remove one of the spacer washers that the thin nee...

Well when I got the bike in pcs the kid took the swinger and put it on his 2007 cr125 cause it has a broke chain tensioner bolt so I have the 2007 cr125 one and it is slightly too wide to fit I did work it over a little and got it to fit but had to remove one of the spacer washers that the thin need...

Roostius_Maximus wrote:Up o 04 fits too

Are you sure on this? If so that should make it easier to find one

I need a 2000 or 2001 swingarm and linkage for a cr250 thank mike 484-554-5829

It does not need to be perfect or have good bearings

Wont it run hotter with only one coolant hose?

https://bannedcr500riders.com/images/auto/6b37717190957c553ef9370ada946059.jpg https://bannedcr500riders.com/images/auto/dfd55766071201975ce9250e86585588.jpg https://bannedcr500riders.com/images/auto/6bb054eda144570d39dc38a04315d9f3.jpg https://bannedcr500riders.com/images/auto/55a092d7cc257a785ec8...

^^^^ lol I bet that sucked

Other than the ignition and clutch side cover, what ither motor type parts fits the 500 from the 250

this is what it looked like when I got there.

yea it was a mess I don't think they ever cleaned the thing oil and coaldirt is 1/4 inch thick on the motor... I'm going to go over all the bearings and get the roller up to par and rebuild the front forks (it came with a pivot works seal kit in the package) then work on the motor swap.. Ican't be w...

I wanted to do this since I got my bike and finally found a gen 1 roller I was gonna get, then luckily found this gen 2 one I cant wait to start the project.. here are a few pics it was kinda apart when I got it then I stripped it down. https://bannedcr500riders.com/images/auto/c76fbc074eeb012d4d4ed...

Tharrell wrote:You'd jizz your pants at Hatfield/McCoy in WV:)

probably

Homeskillet wrote:http://www.tootechracing.com/suspension ... ge%201.htm.

Good setup info here.

link don't work