Search found 132 matches
- October 28th, 2014, 5:24 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Shifter
- Replies: 3
- Views: 282
shifter
i have used 1997-99 cr250 shifters
- September 23rd, 2014, 8:14 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 89 sacrificed for 07
- Replies: 20
- Views: 2439
welding
Seems like you have already gone round with this build and it will take some time to learn to weld aluminum for the results your looking for. The rads are even harder to weld do to the thiness of the material. I would recommend having someone who has built these bikes help you finish it, the best we...
- September 1st, 2014, 6:59 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Aluminum pre-heat for welding
- Replies: 7
- Views: 787
I am preheating my welds on the downtube to the billet y i use, the material is thicker with both pieces. aluminum can look like it is welded and not have proper penetration, if in doubt pre-heat. a trick i learned is to turn just your acetylene on, blacken the aluminum with it. now fire up your mix...
- June 25th, 2014, 10:30 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: My new gen5 cr..125?
- Replies: 4
- Views: 668
af125
that thing is sweet, love the way the gen 5's look. they are better looking than the new gen 6.
- March 9th, 2014, 11:11 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 89 sacrificed for 07
- Replies: 20
- Views: 2439
07 build
the 07 is a gen 4 frame, the cr500 motor will fit in there with ease. depending on where you clock the motor you may need to heat and push the fuel tank in a little, mainly to keep the tank spigot from hitting the spark plug.
Are you replacing the frame rails or using a cp500 kit ?
Are you replacing the frame rails or using a cp500 kit ?
- February 1st, 2014, 5:23 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: My Custom Headstay
- Replies: 18
- Views: 2516
headstay
That part looks identical to the one's i have made
- December 24th, 2013, 7:49 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Air box question
- Replies: 4
- Views: 649
Re: Air box question
Would a CRF-X air box fit into a CRF-R subframe? In other words, are the subframes for a CRF-X and a CRF-R different so you couldn't put an X air box in a R subframe? The 2004-05 crf-r and 2004-09 crf-x model subframes are the same frame with different mounts for the plastics,airbox and radiator ca...
- October 13th, 2013, 5:05 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Stoffers Racing Service: A/F Conversions, Parts, Motors
- Replies: 133
- Views: 45144
Frame conversions
For those interested im still doing conversions, Paul has referred hoons to me. Thanks Paul. My turn around is generally a week, ship your frame to me before the weekend and i can usually have it done ready for shipping the following monday. Do you need reference to my work ? check this, http://m-wo...
- August 2nd, 2013, 10:21 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: What is this "Y" from...
- Replies: 17
- Views: 1516
Looks the same to me, just relocated. What do you do to the markings and the original mounts on the back of the Y, grind them off? Yep. Along with new cradle/mounts welded back in. That is exactly what i did, only i didn't cut the openings open on the sides where the cradle goes into the y.There is...
- August 2nd, 2013, 6:45 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: What is this "Y" from...
- Replies: 17
- Views: 1516
- August 2nd, 2013, 6:37 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: My new A/F build
- Replies: 43
- Views: 3679
- April 20th, 2013, 11:43 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Gen 4 CRF450 to CR250 Conversion - Help Needed
- Replies: 6
- Views: 723
the crf450 frame is to long in the engine bay front to back, you will probably have an issue with the exhaust header reaching the motor with out hitting the frame. Im currently working on a 2008 crf250 frame with the 1997 cr250 motor, to get the motor positioned right a lot of material must be cut f...
- April 19th, 2013, 7:43 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: MxDogger Gen 5 conversion Built for Mudguts
- Replies: 5
- Views: 890
I have a couple questions, more about product than process :lol: the seat, is it tacky feeling? kinda like a gripper? hows the fit? does it leave a gap anywhere more than a stock one? the tank, does it feel huge wide or is that width above where your legs would hold? I'm piecing mine together right...
- April 19th, 2013, 7:36 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: MxDogger Gen 5 conversion Built for Mudguts
- Replies: 5
- Views: 890
JB, currently the headstay block was a one off. the headstays i have had, need to have more made up as im down to my last one. I do not sell my parts, i have sold a couple headstays and frame rails but really there's people out there who would buy them then copy them for their own profit. besides th...
- March 17th, 2013, 5:31 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 2008 crf250/cr250 Conversion
- Replies: 0
- Views: 419
2008 crf250/cr250 Conversion
Finally started this project a weekend ago, This is a challenging build as the cr250 motor doesn't fit in there like a cr500 motor, the clutch case seems to be farther back on the engine block causing interference to the loweer right frame rail and the frame casting. I approached the problem by sett...
- March 17th, 2013, 5:08 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Progress so far
- Replies: 2
- Views: 362
very cool build, Roland Sands built one of these, ever since seeing that bike I have thought about doing one. I would take it to the next level of course, just add a few more things basically, like rearward foot controls, set up a stock front end that would be lighter, an aluminum gas tank that woul...
- March 15th, 2013, 3:38 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: CR 295
- Replies: 18
- Views: 4941
- February 24th, 2013, 1:46 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: MxDogger Gen 5 conversion Built for Mudguts
- Replies: 5
- Views: 890
MxDogger Gen 5 conversion Built for Mudguts
Here is a build i started at least a 1 1/2 years ago for Mudguts who lives in Australia. It started out as just a frame conversion then it was relized i needed it to be a roller to figure motor placement. As mudguts purchased parts over this time period i did what i could until the bike was complete...
- February 24th, 2013, 8:30 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 07 crf250 with 01 cr250 motor
- Replies: 69
- Views: 7973
- February 24th, 2013, 6:06 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 07 crf250 with 01 cr250 motor
- Replies: 69
- Views: 7973
- February 23rd, 2013, 6:09 am
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 07 crf250 with 01 cr250 motor
- Replies: 69
- Views: 7973
- January 8th, 2012, 8:13 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 2008 crf450 - 500af
- Replies: 33
- Views: 2799
mel it will be ok to start cutting the y out, you will need to do this first so the motor can be installed to determine the correct position in the frame. I took a crf250 rolling chassie flipped it upsidedown like a bicycle, cut the y out, flipped it back on its wheels, set the motor in and clocked ...
- January 3rd, 2012, 5:25 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: Mik329's Gen 4 250
- Replies: 26
- Views: 2466
- January 3rd, 2012, 4:01 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 2008 crf450 - 500af
- Replies: 33
- Views: 2799
- August 24th, 2011, 6:51 pm
- Forum: A/F's Only.... Talk About Your Beer Can, Right Friggin HERE!
- Topic: 714's 08 CRF250-500 Conversion
- Replies: 66
- Views: 6587
Looks really nice man, good job on the small stuff. I havent had time to do all the research to make the newer 06-09 crf250 subframe to work. I would recommend anyone doing a crf250 conversion use the 04-05 crf250 subframe and parts, also the 04-09 crf250 X SUBFRAME will work as it is the same as th...